When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I haven't put the new pick-up coil on yet nor have I cleared the codes on it. It been running fine so I checked the codes again and it shows 12 and 55. Shouldn't the 11 and 54 still be on there since I haven't cleared them off?
Well I put the new pick-up coil on and I was letting it idle and it started trying to stall on me so I was keeping it running by giving it some gas and it started popping through the tail pipes. I kinda killed it and checked for codes and all I got was 12 and 55. It sure is aggravating.
Any ideas?
Well I put the new pick-up coil on and I was letting it idle and it started trying to stall on me so I was keeping it running by giving it some gas and it started popping through the tail pipes. I killed it and checked for codes and all I got was 12 and 55. It sure is aggravating.
Any ideas?