When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 1989 dodge D100 with a 3.9L engine. It does ok for a V6 but I would like to improve the performance a little. Are there any bolt-ons anyone could recommend that don't cost an arm and a leg?
I have a 1989 dodge D100 with a 3.9L engine. It does ok for a V6 but I would like to improve the performance a little. Are there any bolt-ons anyone could recommend that don't cost an arm and a leg?
I'm not interested in a motor swap. This truck is just like it came from the dealership and I want to keep it original.
The pre-magnum 3.9 was just a place holder. They dropped the 225 slant 6 and put it in. This allowed a shorter dog house on the newer trucks while having equipment to sell. I liked the 3.9 Magnum I had in my '93 Dakota as it had a nice balance of power and economy. The V-6 in your truck has plenty of room to work on it, but that body shell was designed for the big block engines. You can try changing the gearing to either get more power OR more economy. Unfortunately you can't have both.
If you like the truck like it is, there isn't really much you can do.
Benjamin Franklin said that if you're going to do something, do it right. In other words, "Fart Proudly". Why fool with sissy little laughing gas. Use THIS;