2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Dual CAI

Thread Tools
 
Search this Thread
 
Old May 2, 2007 | 10:05 PM
  #21  
imnothot02's Avatar
imnothot02
Record Breaker
Joined: Jul 2005
Posts: 2,244
Likes: 0
From:
Default RE: Dual CAI

buy a bum... is it the exhaust recycle?
 
Reply
Old May 3, 2007 | 12:02 PM
  #22  
Candakota02's Avatar
Candakota02
Thread Starter
Joined: Jan 2007
Posts: 22
Likes: 0
From:
Default RE: Dual CAI

???...bum, wife has a nice one thanks...
Don't know exactly what the hose is for, it's from the air box below the filter and goes to a "T" fitting. One goes toward the firewall, the other somewhere toward the throttle body.
If I was to mod my CAI from the 3.9, where would I drill the hole for the hose to hook up??-as close to the cone filter as possible??
 
Reply
Old May 3, 2007 | 01:03 PM
  #23  
chris1974's Avatar
chris1974
Veteran
Joined: Apr 2007
Posts: 441
Likes: 0
From: Houston TX
Default RE: Dual CAI

ORIGINAL: Candakota02

If I was to mod my CAI from the 3.9, where would I drill the hole for the hose to hook up??-as close to the cone filter as possible??
Im not too fimiliar with the 3.9, but my hose runs into the intake tube about 5 or 6 inches away from the filter. At least thats the way it was before i modified the location of the filter. I believe the hose is for air recycle....but not too sure. I will do some research to find out for ya!
 
Reply
Old May 3, 2007 | 01:53 PM
  #24  
Candakota02's Avatar
Candakota02
Thread Starter
Joined: Jan 2007
Posts: 22
Likes: 0
From:
Default RE: Dual CAI

Thx Chris.

Is it the Mass Air Flow tube??
Do you have a pic of your CAI as you have an 03 with 4.7, should be the same right??
 
Reply




All times are GMT -4. The time now is 10:58 AM.