No Brakes
#1
No Brakes
Friday i changed the hub assembly on the front passenger side of my truck and when i put everything back together i had no brakes. i did nothing with the brakes when i did the hub. i took the caliper off and hung it up out of the way and put it back on when i was done. I've tried bleeding the brakes for hours, changed the master cylinder. Tried cracking open the lines at the master cylinder to see if there was air there. i pulled the vacuum line off the booster and you could hear the air, so i don't think that is bad. I have all fluid coming out of everywhere you could bleed the lines from and still no brakes. (I did bench bleed the master cylinder before putting it in). With the truck off you get a stiff pedal when trying to bleed, but once its started it goes straight to the floor.
#2
#3
#4
#5
RE: No Brakes
i can't stop. at all. i just called the dealer for prices and that valve is a little over 100. but the guy i talked to said it could be the booster even though when i pull the vacuum line off with the truck off you can hear the air come out of it. Could it still be the booster? Wouldn't i still have some kind of brakes even if that was bad?
#6
#7
Trending Topics
#8
RE: No Brakes
no, i went and got the proportionary valve from the dealer and 120 bucks later still no brakes. It took ten minutes to change and hours of bleeding i would say there is no air in the lines and i still have nothing. So, new wheel cylinders, new brake booster, new proportionary valve, no leaks, and still no brakes. Everyone i talk to is stumped on the issue, i was hoping you guys would be able to help.
#10