'



there i fixed it for you, since you seem to be a little bit unclear about the capabilities of the 2.5l

Well did some more work on it. Fixed the pinion angle as it needs to be parallel to the transmission. which is about 2 degree down, and the pinion is 2 up.

Also found the paper gasket doesn't work. So im going to have drain it all out and redo the fluids... so more $$$. Going to just use some RVT as that stuff seals anything.

aint that the truth. i lost the little rubber nose piece for my safety glasses i use when grinding metal so i made a new nose bridge from RTV. kinda ghetto, but what ever.

rtv is ok to use as a gasket on diff covers ya silly s.o.b.

That's what they used from the factory on my '05. Loctite Instant Gasket will work too, used that when I did my diff as I managed to lose the RTV I bought during the change somehow

ya kno varsis.... im not sure my bed would fit under your truck just yet.... im gonna need to do a bit of a BD...you're gonna have to lift it some more too

hey so any progress over the weekend? !

Was busy with valentines day and what not, and now it's family day so I can't pick up metal today :@ was going to re-brace the front.

have you driven it yet?

Well it got some sun today, still want to find out why one side is sitting higher, hopefully the springs just settle down...