If you used the tips and tricks correctly it should be working with out a problem. it sounds like the voltage is too low for the new tps

 

wel the new code is p1297 no change in map sensor from start to run

 

Check that tiny little hose that connects the map sensor to the tb

 

will do any tips on getting the o2 sensors out?

 

well where is the hose??? i didnt see one ? just one to the left of it

 

the map sensor should have a tiny hose that connects it to the tb it is very visible.
On the O2 sensors PB blaster is the only thing that will aid you in getting them off. the perfect tools to take them out are the O2 socket and a long breaker bar, or short breaker bar with a pipe for leverage.

 

well the first o2 sensor seems like its going to strip ? i used alot of pb blaster on it

 

Strip??? the threads or the nut

 

the nut was starting to round

 

you were using pliers huh?