2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

iac maken my ideal high?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-11-2011, 07:18 PM
frydaddy82's Avatar
frydaddy82
frydaddy82 is offline
Veteran
Thread Starter
Join Date: Jan 2011
Location: easter north carolina
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default iac maken my ideal high?

i cleaned my tb a few weeks ago i got a new tps and cleaned the aic motor and ever since then ive noticed it always stays at 1000 rpms when its in park and around 900 in gear. also when its cold i can tap the gas and it will rev up and slowly come back down. would a bad aic motor cause this?
 
  #2  
Old 03-11-2011, 09:29 PM
Derek2002's Avatar
Derek2002
Derek2002 is offline
Professional
Join Date: Jul 2010
Location: Mckee,Ky
Posts: 234
Likes: 0
Received 1 Like on 1 Post
Default

Have you tried resetting your ECU? You probably knocked its home position out of whack when you were cleaning it and the throttle body.
 
  #3  
Old 03-12-2011, 05:50 AM
frydaddy82's Avatar
frydaddy82
frydaddy82 is offline
Veteran
Thread Starter
Join Date: Jan 2011
Location: easter north carolina
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default

yup reset it twice now still the same
 
  #4  
Old 03-12-2011, 04:05 PM
jondakotaguy's Avatar
jondakotaguy
jondakotaguy is offline
Record Breaker
Join Date: Jan 2011
Location: Texas
Posts: 1,849
Likes: 0
Received 10 Likes on 9 Posts
Default

Did you pull the entire Tb, pull off all sensors and really give it a detail clean?

Did you take a fine sandpaper to the base of the TB and Top of the INtake to make it nice and smooth..

DId you replace the gasget?
 
  #5  
Old 03-12-2011, 08:12 PM
frydaddy82's Avatar
frydaddy82
frydaddy82 is offline
Veteran
Thread Starter
Join Date: Jan 2011
Location: easter north carolina
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default

yea man cleaned it really good and got a new gasket. im thinkn about just buyn a new aic motor and see if that helps it. also i replaced my clutch fan with a electric one and today at work it got up to 70ish dergrees out side. i was sitin with the truck runnin and if i turned my a.c on it would start to climb over 210. im thinkn i might need to flush the rad out or somthin. the new fan was blowin good so idk..
 
  #6  
Old 03-12-2011, 08:43 PM
jondakotaguy's Avatar
jondakotaguy
jondakotaguy is offline
Record Breaker
Join Date: Jan 2011
Location: Texas
Posts: 1,849
Likes: 0
Received 10 Likes on 9 Posts
Default

Yeah if the Temp is climbing.. i would say so..

What about the Intake gasgets have you gotten around to it?
Do you still have the low end shutter/shake
 
  #7  
Old 03-13-2011, 08:23 AM
frydaddy82's Avatar
frydaddy82
frydaddy82 is offline
Veteran
Thread Starter
Join Date: Jan 2011
Location: easter north carolina
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default

nah man ive been to busy to change it out and yea its still got shutter to it.
 
  #8  
Old 03-14-2011, 11:26 AM
jondakotaguy's Avatar
jondakotaguy
jondakotaguy is offline
Record Breaker
Join Date: Jan 2011
Location: Texas
Posts: 1,849
Likes: 0
Received 10 Likes on 9 Posts
Default

Funny.. My dad seems to think it might be in the exhaust.. but not really sure.. like that one guy that replaced his Cat... there is no telling though.. I'm honestly thinking about pulling the CAT... and see what it does.
 
  #9  
Old 03-14-2011, 09:35 PM
frydaddy82's Avatar
frydaddy82
frydaddy82 is offline
Veteran
Thread Starter
Join Date: Jan 2011
Location: easter north carolina
Posts: 291
Likes: 0
Received 0 Likes on 0 Posts
Default

i wouldnt think it would be a cat but who knows man. lol keep us updated!!
 
  #10  
Old 03-15-2011, 11:46 AM
jondakotaguy's Avatar
jondakotaguy
jondakotaguy is offline
Record Breaker
Join Date: Jan 2011
Location: Texas
Posts: 1,849
Likes: 0
Received 10 Likes on 9 Posts
Default

I wouldn't think so either.. but so much contradicting information out there.. esp.. when you hear/have problems others report too all coming together you could easily spend tons of $$ throwing at it..

Did you happen to see if your Oil gauge been sticking around 20ish sometimes? Just curious..

Mine has done it about 3 times now..
 


Quick Reply: iac maken my ideal high?



All times are GMT -4. The time now is 10:12 AM.