2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Help!! Stop running and won't start

Thread Tools
 
Search this Thread
 
Old Jul 28, 2011 | 08:27 AM
  #1  
slambmx's Avatar
slambmx
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 5
Likes: 0
Default Help!! Stop running and won't start

Hello,
I have a 2000 Dodge Dakota R/T that stopped running all of sudden and will not restart (just turning over). Any suggestion would help.

1. no codes (checked w/ Superchips tuner, key on and off routine, reset routine)
2. 42 lbs. of fuel pressure in the rails
3. voltage going to injectors
4. voltage to spark plugs
5. changed the cam and crank sensor
6. 02 sensor fuse #24 under the hood not showing any power (not sure why)
7. added gas to throttle body with no response
8. battery full charge

James
 
Reply
Old Jul 28, 2011 | 12:17 PM
  #2  
moparman_2004's Avatar
moparman_2004
All Star
Joined: Aug 2009
Posts: 933
Likes: 2
From: couer d' alene, id
Default

im guessing its not making any noises or any thing either
 
Reply
Old Jul 28, 2011 | 01:44 PM
  #3  
slambmx's Avatar
slambmx
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 5
Likes: 0
Default

Not making any wierd noises. Did not make any noises when it shut down without warning. I am not if it is the computer. I would think it would fire with spark, fuel and no warning codes. I placed the stock program back and still the same results.
 
Reply
Old Jul 28, 2011 | 02:00 PM
  #4  
moparman_2004's Avatar
moparman_2004
All Star
Joined: Aug 2009
Posts: 933
Likes: 2
From: couer d' alene, id
Default

huh idk then you check all your fuses and what the fusable link
 
Reply
Old Jul 28, 2011 | 02:28 PM
  #5  
slambmx's Avatar
slambmx
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 5
Likes: 0
Default

Fuse #24 for the 02 Sensors in the engine compartment does not have a source of power, these are the micro fuses. All the others have power. I would think it would send a error code to the computer.
 
Reply
Old Jul 28, 2011 | 04:40 PM
  #6  
moparman_2004's Avatar
moparman_2004
All Star
Joined: Aug 2009
Posts: 933
Likes: 2
From: couer d' alene, id
Default

what about the fusable link beyond that have you tryed resetting your ecm
 
Reply
Old Jul 28, 2011 | 07:53 PM
  #7  
slambmx's Avatar
slambmx
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 5
Likes: 0
Default

It looks like the alternator is bad. I can't believe that would shut the engine off the engine.
 
Reply
Old Jul 28, 2011 | 09:29 PM
  #8  
slambmx's Avatar
slambmx
Thread Starter
|
Registered User
Joined: Jul 2011
Posts: 5
Likes: 0
Default

Changed alternator and the same problem. SUCKS!!
 
Reply




All times are GMT -4. The time now is 12:41 PM.