2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Pinging when on the throttle

Thread Tools
 
Search this Thread
 
  #1  
Old 02-03-2012, 11:24 PM
02Dakota4.7's Avatar
02Dakota4.7
02Dakota4.7 is offline
Registered User
Thread Starter
Join Date: Feb 2012
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Pinging when on the throttle

I have a 2002 Dakota 4.7 i just recently bought a superchips flashpaq. I had a slight pinging before with 87 octane. So i started running 91 or 93 octane and dont have a problem. Now when i Set the tuner to 91 performance or towing mode it Pings bad. I was wondering if any one could tell me how to fix the problem?
 
  #2  
Old 02-04-2012, 08:30 AM
02Dakota4.7's Avatar
02Dakota4.7
02Dakota4.7 is offline
Registered User
Thread Starter
Join Date: Feb 2012
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Angry

does anyone have a clue whats happening??? Truck is really pissing me off
 

Last edited by 02Dakota4.7; 02-04-2012 at 08:33 AM.
  #3  
Old 02-04-2012, 10:23 AM
00DakDan's Avatar
00DakDan
00DakDan is offline
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Received 36 Likes on 32 Posts
Default

Here's some ideas:

Possibly the wrong heat range on the spark plugs. What are you running?

Carbon buildup in the heads.

Air/Fuel ratio to lean.
 
  #4  
Old 02-04-2012, 10:34 AM
02Dakota4.7's Avatar
02Dakota4.7
02Dakota4.7 is offline
Registered User
Thread Starter
Join Date: Feb 2012
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

They are the factory plugs. truck has 120K. would a set of
new plugs posibly help?
 
  #5  
Old 02-04-2012, 11:00 AM
02Dakota4.7's Avatar
02Dakota4.7
02Dakota4.7 is offline
Registered User
Thread Starter
Join Date: Feb 2012
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

I actually just pulled out the plugs and they look somewhat new. they are champion 3318. the plugs do look alittle white on the lean side. is there some kind of adjustment? or are they the wrong plugs??
 
  #6  
Old 02-04-2012, 12:23 PM
00DakDan's Avatar
00DakDan
00DakDan is offline
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Received 36 Likes on 32 Posts
Default

What do you mean factory? As in the original set?

You could throw in a new set, 3318 is fine. Brown or light gray is normal. There is no adjustment, the PCM handles the A/F ratio.
 
  #7  
Old 03-27-2012, 01:21 AM
tnvols123's Avatar
tnvols123
tnvols123 is offline
Rookie
Join Date: Jul 2011
Location: TN
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Default

If you are losing oil as well, have your plenum gasket checked
 
  #8  
Old 03-27-2012, 09:41 AM
00DakDan's Avatar
00DakDan
00DakDan is offline
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Received 36 Likes on 32 Posts
Default

There's no plenum gasket in the 4.7.
 
  #9  
Old 03-27-2012, 01:22 PM
moe7404's Avatar
moe7404
moe7404 is offline
Record Breaker
Join Date: Jul 2007
Location:
Posts: 2,040
Likes: 0
Received 0 Likes on 0 Posts
Default

you need a plug at lest 1 heat rang colder 2 colder is better. also a plug with the spark gap closer to the base, its like turning the timing back. and opening the the gap .005 in will make the heat range took like it is 1/4 to 1/2 hotter.
 
  #10  
Old 03-28-2012, 05:54 AM
DakinUK's Avatar
DakinUK
DakinUK is offline
Veteran
Join Date: Aug 2005
Location:
Posts: 257
Likes: 0
Received 1 Like on 1 Post
Default

I used to use a Superchips 3715 (I think!) programmer on my 4.7 and it also made mine ping. I thought it was because there's a difference between how they measure the Octane rating over here. I had to run mine on Super Unleaded (most expensive grade here) and it STILL occasionally pinged, so had to use Octane booster.
I think they run too much advance in their settings. I now have a SCT tuner with a Hemifever standard tune, which has been slightly modified for the fuel over here. definitely the way to go!

By the way, the 4.7 doesn't have a plenum gasket, just a plastic inlet manifold, although I have seen one that had got so hot that the plastic had started to deform.
 


Quick Reply: Pinging when on the throttle



All times are GMT -4. The time now is 07:06 AM.