98 dakota 5.9?
#1
98 dakota 5.9?
Hi all. Ive been searching around and cant seem to find the answer im looking for. I have a pukey little 98 3.9 v6 4x4 dakota . its driving me nuts not having power like my old truck did. I have found a 2001 5.9 with tranny and computer. Was wondering if all that would work in my truck or if id have to find new pcm? Thanks in advance
#2
I'm not the most knowledgeable person when it comes with transmissions, but I don't think that the one from the 2001 will work (I'm assuming it's at r/t and 2wd), because it won't be compatible with a transfer case.
And wouldn't the differentials have to be replaced in order to withstand the increased power/torque from the 5.9
And wouldn't the differentials have to be replaced in order to withstand the increased power/torque from the 5.9
#4
The computer bus changed in '01. You have a 2 wire CCD bus in you '98. In '01 it went to a single wire PCI bus. They are not compatible.
You could get a PCM for a '99 5.9 along with the engine wiring harness, maybe from a boneyard.
We need more info on your transmission issue. Is it from a 2 or 4wd? If 4x4, do you get the transfer case - it will be electronically shifted, another issue to deal with.
What do you have for a rear end now? Both the 8 1/4 and 9 1/4 are fairly robust. You shouldn't have any real issues. The 9 1/4 is the heavier duty version.
You could get a PCM for a '99 5.9 along with the engine wiring harness, maybe from a boneyard.
We need more info on your transmission issue. Is it from a 2 or 4wd? If 4x4, do you get the transfer case - it will be electronically shifted, another issue to deal with.
What do you have for a rear end now? Both the 8 1/4 and 9 1/4 are fairly robust. You shouldn't have any real issues. The 9 1/4 is the heavier duty version.