Just replaced the Clockspring and my air bag light is still on. Was told the system should reset its self and the light would go out. Do I need to do something else or do I have a another issue?

 

Did the horn or cruise control not work?

You probably have another issue. It is supposed to do a self test at key on.

It can be read by the dealer. Most scan readers won't pick up body trouble codes.

 

could be a loose pin in the plug to the air bag. cause it happens to me everyone once an a while.

 

Horn worked not sure about cruise control (never use it). Broke clockspring when I replace the steering shaft.Had a buddy that did his but it is in a Ford and his supposedly has to be reset by dealer. Everything I have read about Dodge they reset. I assuming I have another issue. Already had in the dealer when had a key fog programed they want $180 to tell what the problem is. This is why I don't like to deal with dealerships. $180 to hook up scanner and tell what the issue is a little outrageous. Wish I could make $180 for 5 mins time.

 

have you tryed to pull the fuse and reset the system or reset the ecm

 

I will check the fuses.

 

Have your dash apart recently?

When throwing my sub in I forget to unplug the air bag connection so I yanked a little too hard and thing I damaged the connection.

My airbag light is intermittent and i'm 90% sure its cause I pulled the dash apart.

 

Fuse didn't work. I haven't had the dash apart.Found a little trick other day to reset air bag. May try it in a day or two see if works. Let you know.

 

A little trick?

Please share!

 

Someone had told me about a paper clip trick they had seen on You Tube. Haven;t look yet or try it see if it works. Said to put in search box Airbag light reset