Redlining before shift
#11
03-30-2013, 01:18 AM
Legend
Okay, throttle body lever and the lever on the tranny are in absolute sync. (had to use a camcorder, long AV cables and a TV to verify it but it is done.) Still have the rev limiter kicking in and some funny shifts happening.
What would you recommend next...pressure reg, speed sensor, band adjustment?
I know you have seen the questions hundreds of times and I appreciate you all putting up with me.
Thanks,
-Keith
What would you recommend next...pressure reg, speed sensor, band adjustment?
I know you have seen the questions hundreds of times and I appreciate you all putting up with me.
Thanks,
-Keith
The front band is only used for second gear (It's the only hanging component that changes state from first to second [the over-run clutch lets go but it hanging up would not cause it to refuse to shift]), so if it is loose, it may be slow to grab and/or slip. On the 2-3 shift the front band lets go and the front clutch engages.
#12
04-03-2013, 05:32 PM
Join Date: Feb 2008
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#13
04-03-2013, 08:50 PM
Legend
#14
04-24-2013, 01:09 AM
Join Date: Feb 2008
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
