98 Dakota cummins 3.3 build
#11
#14
#15
i found specs for the 360 5.9 550-600 depending if it is California or not California is 50 lbs heavier
I posted some new pictures on photobucket http://s1125.photobucket.com/user/de...dakota%20build
did a pan modification this mod will give me 3" of extra height should sit better in the engine bay less of a hood scoop I will need a hood scoop for the inter-cooler anyway and the fuel pump is mounted 14psi
Drew the guy I bought this engine from did me a huge favor he had the sn for the engine
I had taken the plate off and it got misplaced but now I am good
I posted some new pictures on photobucket http://s1125.photobucket.com/user/de...dakota%20build
did a pan modification this mod will give me 3" of extra height should sit better in the engine bay less of a hood scoop I will need a hood scoop for the inter-cooler anyway and the fuel pump is mounted 14psi
Drew the guy I bought this engine from did me a huge favor he had the sn for the engine
I had taken the plate off and it got misplaced but now I am good
#16
i found specs for the 360 5.9 550-600 depending if it is California or not California is 50 lbs heavier
I posted some new pictures on photobucket http://s1125.photobucket.com/user/de...dakota%20build
did a pan modification this mod will give me 3" of extra height should sit better in the engine bay less of a hood scoop I will need a hood scoop for the inter-cooler anyway and the fuel pump is mounted 14psi
Drew the guy I bought this engine from did me a huge favor he had the sn for the engine
I had taken the plate off and it got misplaced but now I am good
I posted some new pictures on photobucket http://s1125.photobucket.com/user/de...dakota%20build
did a pan modification this mod will give me 3" of extra height should sit better in the engine bay less of a hood scoop I will need a hood scoop for the inter-cooler anyway and the fuel pump is mounted 14psi
Drew the guy I bought this engine from did me a huge favor he had the sn for the engine
I had taken the plate off and it got misplaced but now I am good
#17
this isn't the site i found earlier but they say 550 for mopar 360
http://www.gomog.com/allmorgan/engineweights.html
http://www.gomog.com/allmorgan/engineweights.html
#18
this isn't the site i found earlier but they say 550 for mopar 360
http://www.gomog.com/allmorgan/engineweights.html
http://www.gomog.com/allmorgan/engineweights.html
#19
#20