2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

At a loss on this issue, please help

Thread Tools
 
Search this Thread
 
Old Oct 20, 2017 | 10:11 PM
  #1  
Joseph LoBianco's Avatar
Joseph LoBianco
Thread Starter
|
Registered User
Joined: Oct 2017
Posts: 3
Likes: 0
Default At a loss on this issue, please help

I have a 2001 dakota 4.7L. It starts right up and runs fine. Once you shut it off, it wont start for about a half hour or so. I have changed engine temp sensor,
crank sensor crank sensor
,
radiator radiator
, the computer and no resolve. Also changed
fuel pump relay fuel pump relay
. I am lost, any help would be greatly appreciated
 
Reply
Old Oct 20, 2017 | 10:31 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,395
Likes: 4,213
From: Clayton MI
Default

Need to see what's missing when it won't start... Spark, or fuel. Does the pump run when you try and restart?
 
Reply
Old Oct 21, 2017 | 05:10 AM
  #3  
Joseph LoBianco's Avatar
Joseph LoBianco
Thread Starter
|
Registered User
Joined: Oct 2017
Posts: 3
Likes: 0
Default

The fuel pump does kick in when I try to restart. For the spark, I dont think I have the proper tools to test for that.
 
Reply
Old Oct 21, 2017 | 08:30 AM
  #4  
00DakDan's Avatar
00DakDan
Section Moderator
15 Year Member
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
Default

Just because you hear the fuel pump it does not mean the injectors are firing. You need a "noid" light.
For the coils, you could pull a coil off and see if the plug fires.
 
Reply
Old Oct 21, 2017 | 12:01 PM
  #5  
primem's Avatar
primem
Record Breaker
Joined: Apr 2013
Posts: 1,815
Likes: 56
From: Alberta
Default

may be a fuel pressure leakdown issue...after the hot soak...try starting it in clear flood mode or put a fuel pressure guage on it and check for pressure leakdown.
 
Reply




All times are GMT -4. The time now is 12:00 AM.