blower motor only blows on high.
#1
#3
If the blower motor seems to be running strong, it likely isn't the blower motor. Only working on certain settings sounds like the blower switch is either dirty or degrading so it isn't getting good contact. You can try rapidly turning it to try to clean the contacts, but I would suggest replacing the blower controls.
#6
Ya.. The connector is the culprit.. If you don't cut back the wire and put on a new connector, the new resistor will burn up in a short period of time.. What I like to do is... solder on heavy gauge wire to the resister terminals with spade connectors on the end of about one inch wire extensions.. The new connector is less likely to over heat if you can get it away from the resistor..
Last edited by steve star; 03-05-2018 at 10:14 PM. Reason: spelling