2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Body Lifts / For better or worse?

Old Dec 6, 2018 | 01:06 PM
  #21  
eRok666's Avatar
eRok666
Thread Starter
|
Registered User
Joined: Oct 2018
Posts: 24
Likes: 0
From: MN
Default

Originally Posted by HeyYou
How much distance between the bump stops, and the control arms? Cranking up the torsion bars gives you a bit of lift, but, also decreases that gap.... so yeah, it rides rough... as it bounces against the stops. That's just one of the issues that makes lifting IFS trucks so much, erm.... Fun.
actually the bump stops have be been tore out pretty much at the base in the control arm leaving a good 6 inches of space in there. The torsion bars I think I got most of the load off of them. I mean they're gone quite a bit probably a good inch and a half for two on each Bolt for the keys since i got the body lift in
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:28 PM.