2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

any one tried sea foam

Thread Tools
 
Search this Thread
 
Old Nov 12, 2006 | 06:18 PM
  #11  
rhowe's Avatar
rhowe
Professional
Joined: Jul 2006
Posts: 174
Likes: 0
From: Kansas City/Cincinnati
Default RE: any one tried sea foam

i just did my truck w/88k miles and it barely smoked. put the other half in my wifes car and it smoked just a little more. kinda wanted to smoke out main street but atleast my engines clean.
 
Reply
Old Nov 14, 2006 | 12:46 AM
  #12  
eg hatch's Avatar
eg hatch
Joined: Nov 2006
Posts: 4
Likes: 0
From:
Default RE: any one tried sea foam

i ran that stuff in my oil for a about a half hour and nothing happend no change in motor. how much did you put in the vacume line
 
Reply
Old Nov 14, 2006 | 12:52 AM
  #13  
Erich_121's Avatar
Erich_121
Veteran
Joined: Jun 2006
Posts: 341
Likes: 0
From:
Default RE: any one tried sea foam

i just did it a couple hours ago, tons of white smoke, i had to rev it around 2 grand to get it to do that, after about 25 min of running it i noticed that i had slightly beter throtle response and better idle. Worth 6 bucks to me.
 
Reply
Old Nov 14, 2006 | 02:17 AM
  #14  
fenderbender's Avatar
fenderbender
Joined: Jun 2006
Posts: 23
Likes: 0
From:
Default RE: any one tried sea foam

you should put 1/3 of the can in the vaccum hose while running, 1/3 of the can where you put your oil in, and 1/3 into your gas tank. the last two with it shut off.
 
Reply
Old Nov 14, 2006 | 04:04 PM
  #15  
jonnymagnum's Avatar
jonnymagnum
Thread Starter
|
Grand Champion
Joined: Sep 2005
Posts: 6,645
Likes: 3
From: ontario, canada
Default RE: any one tried sea foam

I just dumped all of it down the vaccum hose with it running. cause I always use synthetic oil and I had fuel injector cleaner in the gas already. but if you use regular oil then I would put some in the oil too.


________
SweetInnocents
 

Last edited by jonnymagnum; May 8, 2011 at 03:48 AM.
Reply




All times are GMT -4. The time now is 03:45 AM.