Srtgtr34's Audio & lighting Thread
Captain
Joined: Oct 2008
Posts: 719
Likes: 0
From: Northern KY(tri-state)
TOOO cold out!, definately not installing them tonight but I should have them installed by tomorrow night. I will be in the warm garage so maybe I'll install some speakers too.
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 1,533
Likes: 0
From: New York
No I don't have a kit for the high and low beams but I might get another kit so I can do that. You can't just splice them in because that would over load the wires and relay and cause them to catch on fire, so I would need 2 more ballasts and another relay harness. I was thinking about doing this but I'm stuck on whether I should do that our wire up some custom fog lights. I would get the oem replacement 2000-2001 fog lenses and buy the 898 hid bulb and another Hid kit, The only problem I have with doing it this way is, the only way my fog lights can be on is when I have the headlights on as in low/high beams.
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 1,533
Likes: 0
From: New York
Well I got the driver side 6x5 in and the tweeter but couldn't go any further. It looks like the previous owner f*ckin superglued the window crank on. So I don't think I'll get to do the other side until spring since its way to frigin cold.
Then I tried to do the 6x9's but you have to take the hole friggin back of the car apart to get to them and on top of that the backs of the rear seats are held on by this massive 6 point screw that I don't have any tools to get off.
The hid's, another disaster........
This was just one of those fustrating days.
I did find out that the speakers are cadence ultradrive zx6m 6.5 components, looking them up right now to see if they were any good because they suck now.
Then I tried to do the 6x9's but you have to take the hole friggin back of the car apart to get to them and on top of that the backs of the rear seats are held on by this massive 6 point screw that I don't have any tools to get off.
The hid's, another disaster........
This was just one of those fustrating days.
I did find out that the speakers are cadence ultradrive zx6m 6.5 components, looking them up right now to see if they were any good because they suck now.
Last edited by srtgtr34; Jan 1, 2009 at 04:13 PM.
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 1,533
Likes: 0
From: New York
Just recieved a email from vamp,
Great more work I have to do.......
Cut the base from the top shorter. Possibly in 1/2 and it will then work. Sometimes this has to be done. As Dodge/Chrysler used other parts from their older Neons. But it does work.
-Adam
-Adam
Thread Starter
|
Record Breaker
Joined: Jan 2008
Posts: 1,533
Likes: 0
From: New York
Well its time to start ordering parts for spring, when its warm out so I can install everything.
I looked at those places what I do is find what I want and search around for who has it the cheapest, thanks anyway.
I looked at those places what I do is find what I want and search around for who has it the cheapest, thanks anyway.