2nd Gen Neon 2000 - 2005 2nd Gen Neon

2003 Dodge Neon SXT 2.0

Thread Tools
 
Search this Thread
 
  #1  
Old 11-25-2009, 04:03 PM
DorianM's Avatar
DorianM
DorianM is offline
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lombard, IL
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default 2003 Dodge Neon SXT 2.0

About a week ago I was leaving work, and i started and the light came on, and then i started goiSn my car was shaking hard, and after few second it shuts down. I went to AutoZone and tested the car and i got po132(oxygen sensor hight voltage), po440, po441(EVAP SYSTEM INCORRECT PURGE FLOW). The po132 heated oxygen sensor bank 1 sensor 1 how can this be, I changed the oxygen sensor less than 2 weeks ago. The autozone told me to check the canister, or solenoid for po440, po441,. WHAT DO YOU GUYS RECOMMEND?
 
  #2  
Old 11-28-2009, 04:00 AM
darthroush's Avatar
darthroush
darthroush is offline
Section Moderator
Dodge Forum Moderator
Join Date: Sep 2008
Location: Northern California
Posts: 5,584
Likes: 0
Received 7 Likes on 7 Posts
Default

Check the canister and the lines for cracks, etc.
 
  #3  
Old 11-30-2009, 04:53 PM
DorianM's Avatar
DorianM
DorianM is offline
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lombard, IL
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

Where would that be?
 
  #4  
Old 12-01-2009, 01:40 AM
darthroush's Avatar
darthroush
darthroush is offline
Section Moderator
Dodge Forum Moderator
Join Date: Sep 2008
Location: Northern California
Posts: 5,584
Likes: 0
Received 7 Likes on 7 Posts
Default

Vapor canister is on the right side of the car, in front of the back wheel under the body. The hoses on there, mainly the large one on the left, crack and will cause a leak.
 
  #5  
Old 12-01-2009, 04:17 PM
DorianM's Avatar
DorianM
DorianM is offline
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lombard, IL
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

I have checked it about 50 times and looks good, the lines are good,
 
  #6  
Old 12-01-2009, 08:19 PM
darthroush's Avatar
darthroush
darthroush is offline
Section Moderator
Dodge Forum Moderator
Join Date: Sep 2008
Location: Northern California
Posts: 5,584
Likes: 0
Received 7 Likes on 7 Posts
  #7  
Old 12-02-2009, 12:54 PM
deranged's Avatar
deranged
deranged is offline
Record Breaker
Join Date: Nov 2005
Posts: 2,064
Likes: 0
Received 1 Like on 1 Post
Default

Where do you get that stuff! I need to know!
 
  #8  
Old 12-09-2009, 01:06 PM
joeandcatherine's Avatar
joeandcatherine
joeandcatherine is offline
Registered User
Join Date: Dec 2009
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

i have an '03 dodge neon sxt. i need to replace my oil sending unit or oil pressure switch or oil pressure sending unit, whatever you want to call it. i know where it is (passenger side, rear of engine. tucked right below the manifold) and i've read that to get to it, it's best from underneath the car. do i have to remove any parts to get to it? or is there an easier way. i just don't know where to start. can someone help?
 
  #9  
Old 12-13-2009, 03:41 AM
darthroush's Avatar
darthroush
darthroush is offline
Section Moderator
Dodge Forum Moderator
Join Date: Sep 2008
Location: Northern California
Posts: 5,584
Likes: 0
Received 7 Likes on 7 Posts
Default

You should start your own thread for your own vehicle issue
 
  #10  
Old 12-31-2009, 10:35 PM
DorianM's Avatar
DorianM
DorianM is offline
Registered User
Thread Starter
Join Date: Nov 2009
Location: Lombard, IL
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the help.
 


Quick Reply: 2003 Dodge Neon SXT 2.0



All times are GMT -4. The time now is 09:22 PM.