What Did You Do To Your 2ND GEN RAM Today?
Professional
Joined: Feb 2013
Posts: 161
Likes: 0
today was flush, back flush. replace radiator hoses, clamps and thermo. nice new clean radiator coolant/antifreeze. replaced thermo 195deg. thought since i was in there doing all this work might as well replace.
replaced steering stabilizer also.
replaced steering stabilizer also.
Just got done replacing the worthless fabtech adjustable track bar. I had to put the stock one on and so far no issues with my 5inches of lift. However im definitely eating the tires up until I decide on another trackbar.
Administrator
Joined: Apr 2010
Posts: 87,483
Likes: 4,223
From: Clayton MI
Got my oil pan cleaned out, pickup cleaned out, and everything put back together. New filter, five quarts of oil, fired up, and pressure came up almost immediately. Still 60PSI at idle cold, bit over 40 fully warmed. And of course, since I wanted to try and troubleshoot my misfire issues..... it ran perfect. PCM is still in the process of learning though, so, begin to wonder if I don't have an electrical issue somewhere with a sensor.
See what happens I suppose. Just nice to have my truck back.
Van (Chevy Astro AWD) is down for the count until the new wheel bearing comes in. It sounds horrid, pulls, and makes really rude noises over bumps. No more driving till new bearing installed. Which won't be here for a week.... But, we have two out of three vehicles, so not much of a worry, as I got tired of the corporate bull feces at staples...... had an interesting 'discussion' with the general manager about things getting done.... and even though he recognizes we have a problem, he is still standing by the corporate line, and demanding things that way. (lack of hours, lack of employees, too much work, not everything gets done.) He told me, "this is the way it is going to be." I told him. "Not for me." Handed him my ID tag, and left.
See what happens I suppose. Just nice to have my truck back.
Van (Chevy Astro AWD) is down for the count until the new wheel bearing comes in. It sounds horrid, pulls, and makes really rude noises over bumps. No more driving till new bearing installed. Which won't be here for a week.... But, we have two out of three vehicles, so not much of a worry, as I got tired of the corporate bull feces at staples...... had an interesting 'discussion' with the general manager about things getting done.... and even though he recognizes we have a problem, he is still standing by the corporate line, and demanding things that way. (lack of hours, lack of employees, too much work, not everything gets done.) He told me, "this is the way it is going to be." I told him. "Not for me." Handed him my ID tag, and left.
Bad idea. But sometimes you gotta sell stuff and I get that. Good luck.
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Got my oil pan cleaned out, pickup cleaned out, and everything put back together. New filter, five quarts of oil, fired up, and pressure came up almost immediately. Still 60PSI at idle cold, bit over 40 fully warmed. And of course, since I wanted to try and troubleshoot my misfire issues..... it ran perfect. PCM is still in the process of learning though, so, begin to wonder if I don't have an electrical issue somewhere with a sensor.
See what happens I suppose. Just nice to have my truck back.
Van (Chevy Astro AWD) is down for the count until the new wheel bearing comes in. It sounds horrid, pulls, and makes really rude noises over bumps. No more driving till new bearing installed. Which won't be here for a week.... But, we have two out of three vehicles, so not much of a worry, as I got tired of the corporate bull feces at staples...... had an interesting 'discussion' with the general manager about things getting done.... and even though he recognizes we have a problem, he is still standing by the corporate line, and demanding things that way. (lack of hours, lack of employees, too much work, not everything gets done.) He told me, "this is the way it is going to be." I told him. "Not for me." Handed him my ID tag, and left.
See what happens I suppose. Just nice to have my truck back.
Van (Chevy Astro AWD) is down for the count until the new wheel bearing comes in. It sounds horrid, pulls, and makes really rude noises over bumps. No more driving till new bearing installed. Which won't be here for a week.... But, we have two out of three vehicles, so not much of a worry, as I got tired of the corporate bull feces at staples...... had an interesting 'discussion' with the general manager about things getting done.... and even though he recognizes we have a problem, he is still standing by the corporate line, and demanding things that way. (lack of hours, lack of employees, too much work, not everything gets done.) He told me, "this is the way it is going to be." I told him. "Not for me." Handed him my ID tag, and left.
They must train at the same place as Wal-Mart Managers!
Professional
Joined: Feb 2008
Posts: 194
Likes: 1
From: Rogersville, tn
i put a new bumper on the truck thursday
went and slung some mud yesterday
was heading back into town last night and going round a curve my wheel bearing gave out
so after three hours of work and trailering it home i have new rotors and pads on both sides new axle joint new wheel bearing.
went and slung some mud yesterday
was heading back into town last night and going round a curve my wheel bearing gave out
so after three hours of work and trailering it home i have new rotors and pads on both sides new axle joint new wheel bearing.
