2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

What Did You Do To Your 2ND GEN RAM Today?

Thread Tools
 
Search this Thread
 
Old Dec 23, 2015 | 08:59 AM
  #15331  
Tanner1226's Avatar
Tanner1226
Registered User
Joined: Dec 2015
Posts: 8
Likes: 0
From: Missouri
Default

I put a new radiator in her yesterday after the old one started leaking. Only took me 2 hours including the trip to Napa.







The Jeep on the right is my brothers 99 Grand Cherokee 4.7 Limited
 
Reply
Old Dec 28, 2015 | 09:26 AM
  #15332  
TN_DODGE_RAM's Avatar
TN_DODGE_RAM
Registered User
Joined: Sep 2012
Posts: 7
Likes: 0
Default

Santa brought me a pair of cheap, 6x9 speakers for my 97 Ram. After some finagling, I managed to get the passenger door speaker installed (driver door speaker still works just fine, so I didn't bother replacing that one, yet).

If I had to do it again, I'd go with slim speakers (6.5" slims are much cheaper and easier to find than 6x9" slims) and an adapter plate because I had issues with the depth of normal 6x9 hitting my window (i ended up making a spacer from some scrap wood). The spacer gave me clearance for the window, but my door panel now fits real snug.
 
Reply
Old Dec 29, 2015 | 01:02 PM
  #15333  
ramsportrocks's Avatar
ramsportrocks
Veteran
Joined: Aug 2015
Posts: 309
Likes: 0
Default

yesterday hit the u pull it and found a really nice under rail bed liner for $35
did a quick power wash to hold me until spring at which time I will pull it out and
really clean the HELL out of it
 
Reply
Old Dec 30, 2015 | 12:02 PM
  #15334  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,483
Likes: 4,223
From: Clayton MI
Default

Well, yesterday actually.... but.... truck was running crappy, so, picked up plugs, cap, and rotor. Old plugs really didn't look that bad, just some ash deposits, but, nothing like what I expected given my oil consumption rate.... (guess I REALLY need to have a look at the valve covers......) Cap, on the other hand.... holy smoke. the brass contacts were so carboned up, I am not surprised it rls. Got everything changed out, put back together, reset the PCM, and it runs MUCH better.
 
Reply
Old Dec 30, 2015 | 12:26 PM
  #15335  
TSU_Delta_Chi's Avatar
TSU_Delta_Chi
Rookie
Joined: Nov 2015
Posts: 75
Likes: 0
From: Temple, Tx
Default

Yesterday during lunch I went out to the pick and pull to scavenge for parts to fix my cupholder and get some misc. interior pieces (the little rubber covers that go in the handles on the back of the front seats and such). For $7 I got the pieces I needed and now my cupholder works like new and all the misc. interior trim is back in. I absolutely LOVE the pick and pull, haha!
 
Reply
Old Dec 30, 2015 | 09:36 PM
  #15336  
UnregisteredUser's Avatar
UnregisteredUser
Grand Champion
Joined: Apr 2010
Posts: 5,011
Likes: 6
From: Meeker, CO
Default

Originally Posted by HeyYou
(guess I REALLY need to have a look at the valve covers......)
... on your way to the leaking intake manifold.

Not that I'm wishing that upon you. It's just that time of year when the fickle finger of fate develops a fondness for proctology and a preference for those without heated garages.
 
Reply
Old Dec 31, 2015 | 08:53 AM
  #15337  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,483
Likes: 4,223
From: Clayton MI
Default

Originally Posted by UnregisteredUser
... on your way to the leaking intake manifold.

Not that I'm wishing that upon you. It's just that time of year when the fickle finger of fate develops a fondness for proctology and a preference for those without heated garages.
Bite you tongue.

Fortunately, I have a heated garage.
 
Reply
Old Dec 31, 2015 | 01:56 PM
  #15338  
ramsportrocks's Avatar
ramsportrocks
Veteran
Joined: Aug 2015
Posts: 309
Likes: 0
Default

installed the lock and roll tonneau I picked up off of ebay for $112 shipped.. excellent deal
Name:  new%20tonneau%2012-31-2015_zps17yee742.jpg
Views: 78
Size:  209.0 KB
Name:  new%20tonneau%2012-31-2015%20002_zpsdwojpqvw.jpg
Views: 108
Size:  131.6 KB
 
Reply
Old Dec 31, 2015 | 11:04 PM
  #15339  
UnregisteredUser's Avatar
UnregisteredUser
Grand Champion
Joined: Apr 2010
Posts: 5,011
Likes: 6
From: Meeker, CO
Default

Originally Posted by HeyYou
Fortunately, I have a heated garage.
A heated garage AND deferred maintenance on the truck, all at the same time? Dude...

Happy New Year!
 
Reply
Old Jan 2, 2016 | 12:11 PM
  #15340  
horace's Avatar
horace
Professional
10 Year Member
Joined: Jun 2013
Posts: 182
Likes: 6
From: NW Greater MN
Default

I drove my CLEAN Laramie into town for a change usually drive the other one
 
Reply



All times are GMT -4. The time now is 04:06 PM.