I hauled a huge swing set/clubhouse/sandbox with it the other day. Hauled trees, bails of hay, and gardening mulch in it day before yesterday. I drove it to work today. Plan to tow a boat with it later this week.

No time to do any mods, just using it for all the reasons I own it.

 

This is what I did yesterday and today.

Yesterday: I replaced the driver side wheel hub bearing and the driver side U-Joint. On the other side I replaced the rotor and a wheel stud, which broke off months and months ago. Here is the thread.

https://dodgeforum.com/forum/2nd-gen...d-u-joint.html


And today I took the old girl to the car wash and got her all cleaned up. Here is that thread.

https://dodgeforum.com/forum/2nd-gen...-to-shine.html

 

Gave it the yearly bath.

 

Spent all day working on the air horns. Got the tank and compressor mounted and pretty much plugged in. Need 1 male connector to hook up the switch for the relay. Was working into the 10 o'clock hour to find I ****ed up and mounted the horns to the angle piece wrong. Way to go me!! I could have had them done tonight if it wasn't for that

 

ripped apart the entire front end again......just got the carrier out, taking a break now

 

Well yesterday I mounted my amp under my seat, and took a few random pics of the truck, and took my kids for a little spin through the field with them on the back.... didn't do anything today, but my DF decal FINALLY showed up yay!

 

Mounted my horns. Have a couple things to make the project 100% but they work.

Can someone measure the df decal please or tell me if it will fit in the black area above the sliding windows

 

it will bluebeast2, thats where i put mine

 

mine's about 9 1/2"....




the decal is just a hair shorter than it

 

Lets see today tried to pull out an old tv tower and broke 2 9 ton tow ropes. So gonna have to try some other plan. Probly gonna have to get the bobcat out. Then went and picked up a new front axel joint. That thing is clinkin more than the marley brothers and scrooge. I'm gonna look on here for a DIY that will help me to remove it. Also gonna go through the Haynes manual. If anyone has tips let me know. The retard here is gonna need all the help I can get lol.