Put an add a leaf on last night to go along with my leveling kit on the front.


Before:

2010-03-11181246.jpg?t=1283625178


After:

IMG_20100904_141056.jpg?t=1283625248

 

How much lift with the AAL? Mine have a 2" lift.

 

I did 2 on the front so I did 2 on the back to go along with it.

 

looks alot better man nice job !

 

+1, Looks good!

Did some reading about my cold idle issues and starting to lean towards the Air Temp Sensor. Anyone agree/disagree?

 

did some plugs, wires, cap, rotor and oil and filter yesterday. cost me $76, but the truck seems to run alot better. it has 213k on it, and the oil filter had the words, "changed at 127,000" written on the bottom of it. lol. wow.

 

Made a template for my shock tabs so I can relocate them a little higher than the bottom of the axle and so they won't be over extended by 2" from the add a leafs.

So now I have the shock tabs and a transfer case skid plate mocked up and I just have to make a template for the evap canister and maybe the oil pan before I go to my dads work and cut them all out with the laser.

I'm going to make that stuff with 1/4" plate and I'm going to make a skid plate for the gas tank out of 1/8" plate.

 

broke a bleeder screw off trying to bleed the brakes lol this sux

 

Just bought a HBS leveling kit online. Now I play the waiting game.

 

So today I finished off doing the Mopar/P 1.7 roller rockers and Mopar/P cast valve covers. Total time around 5hrs.

Over the last three weeks I have done the following to this truck

New Goodyear 315/75R16 MT/R with Kevlar
Mopar M1 intake(6hrs)
Mopar Dbl roller timing chain(3hrs)
Mopar 1.7 roller rockers(5hrs)
All gaskets used are Mopar/p (great gaskets)
All ball joints(3hrs)
Inner tie rod and outer ends(1hrs)
Drop pitman arm(10min)
Front end alignment(shop)

To come 4.56 gears in the next two weeks, Due to the Goodyear tires being 1.7" bigger than the same size Coopers I took off

Sorry about the bad pic but I just had my cell phone cam
Yah I love my Ram