What Did You Do To Your 2ND GEN RAM Today?
#572
#576
it was my first time ever doing it so it was very time consuming. I tend to double and triple
check when I do things. I tip though: buy your gasket set locally. I picked at set up from
summit because thats where i ordered everything else and I ended up with the wrong stuff
in the middle of my job.
check when I do things. I tip though: buy your gasket set locally. I picked at set up from
summit because thats where i ordered everything else and I ended up with the wrong stuff
in the middle of my job.
#580
Speedo
I finally figured out my Speedo Issues on my '98 2500 4x4. Turns out ,in 1998 the retards at dodge decided to put the speed sensor on the fricken rear axle!!!! This lead to an Intermittant speedo problem,. So anyways I traced the wires from the frame on the left side to the top of the rear axle. I replaced the wires with new ones, soldered and shrunk wrapped all connections, and replaced the speed pickup just for good measure. Works good now. My 94 is a much nicer design. I guess if you never get yer truck dirty or go in the mud you'll never have a problem .
Fork
Fork