Absolutely Mr. Downer! Lots of good.


Left the evap cannister in its location. Runner mount will be instead b/t the front bend mount and rear cab mount. At least that was the mockup verdict today. lol


Gained another 2+ inches of lift!!!







hahahahah

 

That reminds me, I need to relocate my hitch plug, actually need a new one since i smashed mine into peices last weekend
Gotta get some lift
Let me know if you need an extra hand with those sliders

 

Removed front shocks so I can install new with a 2" leveling kit from hell bent
She is sooo rusty under there i needed to saw the shock in half,remove the "tower" and upper half of the shock, pull out the spring ,finally tourch out the lower bolt. It took a bit but I won!!
Jay

 

Gonna drill a couple bigger holes and paint my paint bar today.
Also gonna start plasti-dipping stuff.
My ebay plenum plate should be here this week, then it is off to get a gasket set and a bolt set.
Then I should be good for the plenum repair.

 

I replaced one of my engine block freeze plugs, the one closest to the starter today!

See thread if interested: https://dodgeforum.com/forum/2nd-gen...ed-itself.html

kthnxbai!

 

Rolled some more bedliner over the hack job the PO did. Looks alot better now. Here's hoping it doesn't fade...

Before:


After:

 

Well I went off-roading as soon as the rain stopped, the mud was perfect and it dried nicely all over my truck. The new look.

 

I got a bunch done yesterday.
Got extra bolt holes drilled in the bar, got it painted, took off my tailgate, cleaned up the bumper and masked everything off and started plasti-dippin'!
Did the tailgate plastic too!


That is what I was dealing with on the bumper pads...


All masked.


First coat.


Tailgate....notice the ugly brown-grayness...

Yes, I suck at masking. I checked on all this last night after 2 coats and it looks good, I'm gonna finish up today, gonna put another coat of paint on my lighht bar and hopefully install it tomorrow.

And oh yeah, I also got my ebay plenum plate yesterday too!

 

What did I do... Rather, what am I doing today! Headed to a friends to take a look at the parking brake cable (doesn't work) and brake pads/shoes! I'll report in later... possibly with a DIY, we'll see!

 

Coolio-- Buy some of the herculiner UV protectant. Works great, i use it on everything i herc. Its 20 bucks for enough to do an entire bed, rockers and my front bumper.