DodgeForum.com

2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Just installed efan and love it!

Thread Tools
 
Search this Thread
 
  #21  
Old 03-25-2013 | 12:26 AM
Codynetz2001's Avatar
Codynetz2001
Thread Starter
|
Amateur
Joined: Feb 2013
Posts: 43
Likes: 0
From: Illinois
Default
jhvbhjn_zps715bcb1b.jpg?t=1364181456

wiring out of whole in the shroud. came this way from the factory

jkbjnb_zpse6729999.jpg?t=1364181458

fan switch wire from ac compressor. turns fan on when compressor runs

jglhgl_zpsf3575fd2.jpg?t=1364181454

temp probe in rad.

hghj_zpse7c526b7.jpg?t=1364181342

Fan in the shroud all mounted up
 
Reply Like
  #22  
Old 03-25-2013 | 12:38 AM
Codynetz2001's Avatar
Codynetz2001
Thread Starter
|
Amateur
Joined: Feb 2013
Posts: 43
Likes: 0
From: Illinois
Default
hvjhvb_zps44dc9309.jpg?t=1364182423

the wiring..i would relocate the relay to the same side of the controller because of grille clearing issue.

then you got all this snow in spring

kjhgvb_zpsb020facc.jpg?t=1364182424
 
Reply Like
  #23  
Old 03-25-2013 | 03:01 AM
crazzywolfie's Avatar
crazzywolfie
Legend
Joined: Jun 2009
Posts: 8,024
Likes: 71
From: orangeville ontario
Default
Originally Posted by Codynetz2001
It only ran me about 130. I got my fan off ebay but I best I could have got it cheaper at a junkyard.
that is expensive. for that price i would have used the jeep recall fan. then you would not have had to buy a special 70 amp relay.
 
Reply Like
  #24  
Old 03-25-2013 | 08:17 AM
Scooter78's Avatar
Scooter78
Captain
Joined: Apr 2012
Posts: 608
Likes: 1
From: Olympic Peninsula, Wa.
Default
Originally Posted by Codynetz2001

I'm near the stlouis area. About 30-40 minutes east of stlouis.
Oh cool. Thats only about four hours or so from here.
 
Reply Like
  #25  
Old 03-25-2013 | 03:29 PM
Codynetz2001's Avatar
Codynetz2001
Thread Starter
|
Amateur
Joined: Feb 2013
Posts: 43
Likes: 0
From: Illinois
Default
Originally Posted by crazzywolfie
that is expensive. for that price i would have used the jeep recall fan. then you would not have had to buy a special 70 amp relay.
I will find all my receipts and add it up to give you am exact price. Plus I should have looked in a junkyard before I got one offline because it would have been about 20-30 dollars cheaper
 
Reply Like
  #26  
Old 03-25-2013 | 09:02 PM
Codynetz2001's Avatar
Codynetz2001
Thread Starter
|
Amateur
Joined: Feb 2013
Posts: 43
Likes: 0
From: Illinois
Default
Okay found all and added up and came to $107.53 for the whole thing. You could be a bit higher or lower depending on what you can get the fan for.
 
Reply Like
  #27  
Old 03-25-2013 | 09:21 PM
Blue Mopar01's Avatar
Blue Mopar01
All Star
Joined: Sep 2012
Posts: 769
Likes: 0
From: North Dakota
Default
Looks good! Got any more pics by chance? I'd like to do this possibly and would like all the pics I can get lol
 
Reply Like
  #28  
Old 03-26-2013 | 01:20 AM
Codynetz2001's Avatar
Codynetz2001
Thread Starter
|
Amateur
Joined: Feb 2013
Posts: 43
Likes: 0
From: Illinois
Default
Yeah I can take more shots if you need them. Just tell me what parts you need to see. I'll be glad to help you out and try to answer any questions you need also!
 
Reply Like
  #29  
Old 03-26-2013 | 01:57 AM
Hylander7's Avatar
Hylander7
Professional
Joined: Nov 2011
Posts: 207
Likes: 0
From: California
Default
Question?
All the previous posts I have seen of the E-Fan conversions have had two efans side by side.
Is this one fan enough ?
If the one fan setup is GTG, this is definatly on my short list of mods do.
 
Reply Like
  #30  
Old 03-26-2013 | 08:52 AM
Blue Mopar01's Avatar
Blue Mopar01
All Star
Joined: Sep 2012
Posts: 769
Likes: 0
From: North Dakota
Default
If you have one or two more of how you mounted up the e-fan that would be great. For the ac compressor switch, that kicks the fan in correct? If it does, is that the best way for the fan switch?
 
Reply Like



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 01:21 PM.