Half Doors
#21
The width of the flat at the door section will help provide stability of the upper section, along with dowel length.
Put a rubber seal on the bottom of the insert piece to limit draft and rattle.
Maybe a tag at the front and back with a wing nut to secure it, or just suitcase latches on the inside.
Replace the window seal with a canvas/plastic zip down window.
#23
#24
#25
#26
Can you relocate the speaker to the other opening (back lower corner), then you could take a little more out of the front edge.
Also, can you move the handle back 6" or so and shorten the rod?
Another thought: you can take the door lock rod out... after all, locks only stop honest thieves, and with an open or soft doors, locks aren't doing anything.
Also, can you move the handle back 6" or so and shorten the rod?
Another thought: you can take the door lock rod out... after all, locks only stop honest thieves, and with an open or soft doors, locks aren't doing anything.
Last edited by Spillage; 06-27-2015 at 08:06 AM.