2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Back again!

Thread Tools
 
Search this Thread
 
  #11  
Old 07-28-2019 | 04:59 PM
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 108
From:
Default

It needs a good seafoam treatment, full tune up with brass parts, and then run hard and put away wet.

And deathflash is what I've had since 2002 and I still have fought ping for years off and on. Tuning it will make it way way worse. There is no 'cure.'

Have a read:
http://dodgeram.org/tech/gas/Trouble/ping.htm
 
  #12  
Old 07-31-2019 | 02:49 PM
99Ram1500sport's Avatar
99Ram1500sport
Thread Starter
|
Veteran
Joined: Jul 2007
Posts: 251
Likes: 1
From: In the hills of north georgia
Default

Originally Posted by Ramman18
It needs a good seafoam treatment, full tune up with brass parts, and then run hard and put away wet.

And deathflash is what I've had since 2002 and I still have fought ping for years off and on. Tuning it will make it way way worse. There is no 'cure.'

Have a read:
http://dodgeram.org/tech/gas/Trouble/ping.htm

Issue seems to have been with the plenum. I put a hughes kit on it and the pinging has stopped.
 
  #13  
Old 07-31-2019 | 06:39 PM
HeyYou's Avatar
HeyYou
Administrator
Joined: Apr 2010
Posts: 82,830
Likes: 3,435
From: Clayton MI
Default

Originally Posted by 99Ram1500sport
Issue seems to have been with the plenum. I put a hughes kit on it and the pinging has stopped.
Do the seafoam anyway. Burning oil tends to leave deposits in the combustion chambers, and on the valves, cleaning that off will only make it run better.
 
  #14  
Old 08-03-2019 | 07:35 PM
2bit's Avatar
2bit
Record Breaker
Joined: Jul 2014
Posts: 1,362
Likes: 35
From: Wisconsin
Default

I agree, run Seafoam in the next 2-4 tanks of gas. It usually helps after a 1/2 tank, but I think it takes longer than one tankful to clean everything up. It will actually clean carbon out of the combustion chamber.
 
  #15  
Old 08-03-2019 | 07:37 PM
MoparFanatic21's Avatar
MoparFanatic21
Legend
Joined: Nov 2014
Posts: 8,036
Likes: 307
Default

Originally Posted by 2bit
I agree, run Seafoam in the next 2-4 tanks of gas. It usually helps after a 1/2 tank, but I think it takes longer than one tankful to clean everything up. It will actually clean carbon out of the combustion chamber.
I would do both the fuel treatment and vacuum one
 
  #16  
Old 08-06-2019 | 09:36 AM
99Ram1500sport's Avatar
99Ram1500sport
Thread Starter
|
Veteran
Joined: Jul 2007
Posts: 251
Likes: 1
From: In the hills of north georgia
Default

I'll seafoam it this weekend.
 



Quick Reply: Back again!



All times are GMT -4. The time now is 12:04 AM.