95 3.9 manual to 5.9 manual swap
now that is some good news I am going to buy that harness still can not find a pcm summit dose not have any the parts house web sites do not have them rockauto is sold out I have found out that I need part number 56028324
I just stumbled on this https://www.ebay.com/itm/29482242919...Bk9SR6iFjNHmYQ is the seller right or blowing smoke I am buying this too if it is correct.
Last edited by wopl400; Mar 30, 2023 at 09:07 PM.
that is good to know I guess my next question is will it run and drive I know it is not right but will it work trying wanting to do this going on 6 years now I want to get the correct pcm just want to know if I can bandaid it for a little till one is available. thanks you have been very helpful I assume that I need to get a fuel pump for a 5.9 as well and is this a good clutch kit https://www.summitracing.com/parts/mcl-75008
The 5.2 PCM will run the 5.9, but, in open loop, it'll run lean. So, if you are hard on the throttle, you run the serious risk of excessive spark knock, which can destroy pistons. Do a search on the correct part number. There ARE folks that still have 'em, I just have no idea what their reputation is like. Unfortunately, NONE of them have a very good rep.... Might try Solo PCM, the are reportedly decent, at least.
I was able to find this but I need a vin https://www.fs1inc.com/1995-dodge-ra...plug-play.html
I would chat with 'em on the phone, and see what they have to say.
they have form to fill out they ask for a vin and part number there is a spot for notes I will shoot them an email and see how it goes maybe if I tell them it is for an engine swap I will not need a vin I also found this A1 Cardone 79-8324 it is the replacement for 56028324 but no one has any.
that must be why no sites have them if flag-ship can not help me is this https://www.oreillyauto.com/detail/c...ram-2500?pos=0 any good I it is not cheap but is I need it might be the only option it dose not say any thing about manual or automatic






