2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Flame me if ya want....I don't care.

Thread Tools
 
Search this Thread
 
  #11  
Old 05-04-2007 | 07:56 PM
Mayfair's Avatar
Mayfair
Legend
Joined: Aug 2006
Posts: 8,529
Likes: 0
From: 100% Heaven Sent
Default RE: Flame me if ya want....I don't care.

Airbag it !!

You can drop just the right hand side like busses do. Once granny is inside, tell her to HANG ON and hit the road !!





Seriously, a step stool is all you need ..
 
  #12  
Old 05-04-2007 | 08:36 PM
sbrunn9's Avatar
sbrunn9
Veteran
Joined: Jan 2007
Posts: 307
Likes: 0
From: Wisconsin
Default RE: Flame me if ya want....I don't care.

Don't the offroad editions have 2" lift blocks in the rear? So those could just be removed along with changin the springs to the stock 1500 ones and it would be lower and level. I'm prolly wrong though.
 
  #13  
Old 05-04-2007 | 09:41 PM
Silver_Dodge's Avatar
Silver_Dodge
Grand Champion
Joined: Nov 2004
Posts: 6,099
Likes: 5
From: Colorado
Default RE: Flame me if ya want....I don't care.

ORIGINAL: mopowar

On my boat, I keep a little two step stool lashed to the lifelines for this purpose. It was~$10 @ wally world. It has wide steps, is very sturdy,and has held up to salt spray, sun, and storms for three years. I would think it would hold up pretty good just tossing it in the bed and letting it ride until you need it.

This is the one. Mine is white(sun):

[IMG]local://upfiles/29576/369B70FEF2DC426D94B03D1AD139F615.gif[/IMG]

[IMG]local://upfiles/29576/59B1025AB153454FB03D519F9D0185C2.gif[/IMG]
How about one like this




[IMG]local://upfiles/9095/01E71DBC976E411EB8A6A6DF8AFF204A.jpg[/IMG]
 
  #14  
Old 05-04-2007 | 09:54 PM
ICEMAN_CH's Avatar
ICEMAN_CH
All Star
Joined: Mar 2007
Posts: 890
Likes: 0
From: South Carolina
Default RE: Flame me if ya want....I don't care.

If your going to do this let me know I might be interested in by your springs
 
  #15  
Old 05-04-2007 | 10:07 PM
Racinfan83's Avatar
Racinfan83
All Star
Joined: Aug 2005
Posts: 939
Likes: 0
From: West Of St Louis, MO
Default RE: Flame me if ya want....I don't care.

Rather than spend a lot of money lowering your truck, (and probably lowering it's resale value) I would go to the store and get a folding two-step stool. This was a good suggestion by bander - I thought I would remind you that they make step stools that fold up flat and would fit behind your seat very easily. I commend you for wanting to help your Grandmother!
 
  #16  
Old 05-04-2007 | 11:08 PM
turkeyhunter1962's Avatar
turkeyhunter1962
All Star
Joined: May 2006
Posts: 994
Likes: 0
From: Belle Plaine, Minnesota
Default RE: Flame me if ya want....I don't care.

Try a set of these.
http://www.truckspecialties.com/bully_steps.htm

[IMG]local://upfiles/35230/D9F6AE4E17F44CD9859D1A03B406E5E1.jpg[/IMG]
 
  #17  
Old 05-04-2007 | 11:12 PM
mopowar's Avatar
mopowar
Record Breaker
Joined: Feb 2006
Posts: 1,567
Likes: 0
From: Richmond, Va
Default RE: Flame me if ya want....I don't care.

ORIGINAL: turkeyhunter1962

Try a set of these.
http://www.truckspecialties.com/bully_steps.htm

[IMG]local://upfiles/35230/D9F6AE4E17F44CD9859D1A03B406E5E1.jpg[/IMG]
That's probably the sweetest idea yet. IMO they look better than nerf bars by a long stretch.Little more $ than the step stool, but wtf.
 
  #18  
Old 05-04-2007 | 11:42 PM
Silver_Dodge's Avatar
Silver_Dodge
Grand Champion
Joined: Nov 2004
Posts: 6,099
Likes: 5
From: Colorado
Default RE: Flame me if ya want....I don't care.

Those would still be a ways off the ground though.
 
  #19  
Old 05-05-2007 | 12:17 AM
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 8
From: Gainesville, Ga.
Default RE: Flame me if ya want....I don't care.

here's another idea. its a slide/fold away RV step. it would require some fitting, but it would sure be nice.

http://www.jcwhitney.com/autoparts/P...018344/c-10107



[IMG]local://upfiles/38819/8C9B4BA5272B4DDBA9C98627F26FB20A.jpg[/IMG]
 
  #20  
Old 05-05-2007 | 12:18 AM
jram99's Avatar
jram99
Veteran
Joined: Aug 2006
Posts: 358
Likes: 0
From: Schertz, TX
Default RE: Flame me if ya want....I don't care.

I don't remember the name but they make a step that folds down from under the truck when the door is opened. I know they installed some on the show Trucks one time and I've seen them advertised in some of the truck mags. From what I could tell, they drop down about 8-10 inches or so when either door is opened then fold back up under the cab when closed. I always thought they'd get ragged out in the mud but since you said you don't off road they should hold up pretty good. Jeff.
 


Quick Reply: Flame me if ya want....I don't care.



All times are GMT -4. The time now is 10:31 AM.