2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

screwed help??

Thread Tools
 
Search this Thread
 
  #11  
Old 08-02-2007, 02:53 PM
bigblack 21's Avatar
bigblack 21
bigblack 21 is offline
Thread Starter
Join Date: Aug 2007
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default RE: screwed help??

ok i checked all the oil and stuff and theres no leaking and the no oil in the radiator and still nothing.. anything else??
 
  #12  
Old 08-02-2007, 03:06 PM
Captain Squalus's Avatar
Captain Squalus
Captain Squalus is offline
Record Breaker
Join Date: Feb 2007
Location:
Posts: 1,603
Likes: 0
Received 0 Likes on 0 Posts
Default RE: screwed help??

This isa long shot
Is the TQ still bolted to the flywheel?
 
  #13  
Old 08-02-2007, 04:09 PM
castironman's Avatar
castironman
castironman is offline
Rookie
Join Date: May 2006
Location: New Jersey
Posts: 58
Likes: 0
Received 1 Like on 1 Post
Default RE: screwed help??

faulty valve body, oil pump damaged or governor pressure solenoid. Didi you ever got any check angine light ?
Good luck.
 
  #14  
Old 08-02-2007, 05:22 PM
rhaines00ram's Avatar
rhaines00ram
rhaines00ram is offline
Rookie
Join Date: Jul 2007
Location:
Posts: 85
Likes: 0
Received 0 Likes on 0 Posts
Default RE: screwed help??

Id look at the linkage put on the ebrake and have some one move the shifter while you are under there and make sure it is moving on the trans . I never herd of a trany just going out all at once . Good luck
 
  #15  
Old 08-02-2007, 06:12 PM
bigblack 21's Avatar
bigblack 21
bigblack 21 is offline
Thread Starter
Join Date: Aug 2007
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default RE: screwed help??

i had it moving a lil bit today like a foot then just sat and reved so its gotta be something with the linkage beacuse its like not engaging it i can slide the shifter from rev,all the through
 



Quick Reply: screwed help??



All times are GMT -4. The time now is 06:19 AM.