K+N.............. Summitracing.com 285.00... add 11hp
Airaid..............Summitracing.com 195.00...add11hp
AEM...............Summitracing.com 270.00...????????

which is better for the price?

 

https://dodgeforum.com/m_613741/tm.htm

that one, hands down, save a ton of money too

 

Yeah have to agree with the last post. If you use an open element airfilter, like an Old School hot rod, you will get the best under hood responce. As well as the great sound when you accelerate!

But if your in California, from what I have read, thats a no go. You have to use a C.A.R.B approved after market set up. And from what I have read, only K&N and Airaid are the only manufactures out there that have that approval.

 

thats why u just keep the stock assembly and throw it on for smog

only takes a couple minutes to swap em.

 

how much did you pay for your air intake, and where did you get it?

thanks

and will this work on a stock throttle body, on a 5.9 liter V8?

 

i dont have that kit

yet...

im ordering mine after the 14th of sept. as i have other costs that are more important than an intake

read that thread, itll tell u everything u need to do

 

guess what im sold,but i have a few questions, just try to answer them your best

i have a 5.9 liter, does this matter?

my pcv hose goes from the pcv valve and to the left side of the engine the stock air housing maybe tomarrow ill get a pict if you need it...

thanks again

 

5.9 won't make a difference

You don't touch the pcv hose; that hose goes into the intake manifold, not the air cleaner. It's the other hose that gets replaced with a breather (the clean air side). Just remove that hose and knuckleand stick a 1" breather into the valve cover.

 

yes you were right about the pcv valve hose going into the intake as well as the brake hose on the drivers side, however there is a hose going into the air cleaner housing that goes to the valve cover on the passengers side, is this the one that you said put a breather on?
one question that hose that goes into the air cleaner housing is filtered air, by puting a breather on it the air wouldnt be, or would it with the right breather?

THANK YOU

 

who do i order from?