When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Those with 35's, 4.56, and auto trans, please read:
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Those with 35's, 4.56, and auto trans, please read:
I need to know what your rpm's are. If you could tell me what rpm's you are running when in:
-3rd gear @ 40, 50, 55, 60 mph
-Overdrive @ 50, 55, 60, 65, 70, 75 mph
RE: Those with 35's, 4.56, and auto trans, please read:
Ya, i'm in the process of posting the same question in a few other places, including PS. I'll have my tach installed by next week, so i'll be able to do some comparisons with what people tell me.
RE: Those with 35's, 4.56, and auto trans, please read:
wrong , 3:55 at 70 pulling about 1500 rpm , over drive with the 4.56 pulling 2200 rpm . buttttt my speedo is off now need to get the gear for the speedo .. be intresting to see what others say , then i can judge better what my speed is to my rpm.. of course i could be doing 75-77 mph to ?? so now the question is not only rpm to gear but if your speedo is correct to... hmmm
RE: Those with 35's, 4.56, and auto trans, please read:
I was talking the to TheForce for a while and he thought I had 4.56s as well. Usually when I drive on the highway at 65mph, the truck is at around 2200 rpms. At 70mph its at around 2300-2400 rpms. Does that add up. Damnit wish I just knew for sure.