Stalling, Low RPM, Idle problem.
#1
Stalling, Low RPM, Idle problem.
Hey all. I own a 94 dodge ram, and about 1 month ago she's developed an idle problem. Only when I come to a stop, does the RPM's slam down to 0, and then bounce from 0-1 and then she'll choke out and die. I've replaced plugs, wires, cap, rotar, PCV, EGR, ICV, catalytic converter, and my fuel pump. I still have problems. I brought it to my local dodge dealer, to find out it was a defective fuel pump. Today it was replaced, and instaled no charge. Though, the problem is still in play, unfortunetally. What are your thoughts on this sittuation? It's a 1994 dodge ram, 1500. 5.2 with a manual transmission. 77k miles.
My dad's a mechanic, but he deals with older vehicles. Not up to par with all the fuel injection, and electronics of the newer stuff. I've learned from him, and am learning as I'm going. Basically we're sick of guessing, and have no idea as to what the problem is.
There's no vaccum leak as far as we know, and the batterie seems to be in full working order, as well as the alternator.
Check engine light has never been on, since I've owned it, though the bulb does work!
Send your thoughts my way, because I've got none left!
Thanks in advanced,
Nick
My dad's a mechanic, but he deals with older vehicles. Not up to par with all the fuel injection, and electronics of the newer stuff. I've learned from him, and am learning as I'm going. Basically we're sick of guessing, and have no idea as to what the problem is.
There's no vaccum leak as far as we know, and the batterie seems to be in full working order, as well as the alternator.
Check engine light has never been on, since I've owned it, though the bulb does work!
Send your thoughts my way, because I've got none left!
Thanks in advanced,
Nick
#3
#4
#5
#6
RE: Stalling, Low RPM, Idle problem.
search for the DIY on cleaning the tps... no need to swap it, should be in the DIY thread at the top of the forum. when you swap the IAC, I'd yank off the TB and clean it real good, most likely a cleaning will take care of it, if not then you can swap the IAC valve...
#7
RE: Stalling, Low RPM, Idle problem.
I got a call from the dealership today. They're looking into finding me a computer for it, and they're going to replace it. If it solves the problem, I pay for it. But if not, I dont have to pay for it, and they put the one I already had, back in. I wish I found the forums before I sent it to the dealership! Damn.
No one's ever heard of the Holley MTS, Hmm?
No one's ever heard of the Holley MTS, Hmm?
Trending Topics
#8
RE: Stalling, Low RPM, Idle problem.
i have seen a holley dodge truck, there is a dealership in middletown ct, that built these trucks. they take a bone stock ram or dakota and throw alot of aftermarket performance parts on them. they still do this on the 08/09 models. there web site is www.holleymts.com hal the owner and dealer is a good friend of mine. there is going to be a truck show there coming up, might want to bring it down
#10