this sucks..the forum not working and all

 

anyway i just sunk 80 bucks into a new cps and
other goodies
,
new temp sensor to replace the one i broke{keep
that sensor clean people its brass and if it
corrodes it snaps right off} disconnecting all
electrical connections on the left side to check
my wires....alt,coil, injectors,temp
sensor,headlight,

ez out set to get the rest of the threads out of
the engine block
and a new air cleaner gasket, brokethe old one
when i was taking out the cps

 

please read entire first post ....FIRST
appreciate the help and all but with the forum acting up it's a PITA to reply if i dont have to..
thank you

 

Check the fusible links!

 

well i replaced the cps and the truck started right up...

anyways i damaged the grommet so i didnt install that...not worried about dirt getting in right now as i'm not driving it.. i really just needed to get it running so i could get it inspected and move it from my job to my apt.

but now the truck seems slower than before...alot ...does the grommet help push the cps into position?
did i retard my timing by not installing the grommet?

will get a new grommet and reinstall with cps mod