any rocks or dirt in the pads or rotor? what about defected factory parts?

or suspention? or what about wheel or axle hub

 

honestly dont know, ive had it to many shops nd they all say everything is good

 

does it make the noise when you turn the wheel?

 

Check this TSB. I had this on my '99.
http://dodgeram.info/tsb/1999/03-06-99.htm

 

No sound when i turn wheel, and thanks silver but i have no idea if this pertains to me or with what its talking about. Are theyre any pics i could look at? And would it still apply to me if squeek comes and goes and occurs at high speeds too?

 

also i dont think its this due to the fact that as soon as i step on breaks the squeek stops

 

I had a similar problem and it was the front pads. You have to take them off to see but the retainer springs weren't holding them tight.

 

ill check that out thanks.

 

Make sure the caliper slides/pins are moving freely

 

I ran into a truck at work doing the same thing. This will sound strange but the cure to that one was lubing up the axle seals had another tech tell me about it. Just sprayed some penetrant into the tube and the squeak was gone!