Geez, viper, where do you live?? Freakin LONDON???

 

How the **** could I own a Ram in London?

 

No, under a rock, apperentally

Viper- what the hell is your problem? I like the stock fogs. There is nothing wrong with me using stock fog lights. When i'm going down the road i dont need that much light. I can see fine in the dark with these stock lights. I dont really need nothing more than that. I came on here asking if anybody had installed the stock fog light harness, but all I get is you saying that "fog lights are to be used at speeds under 15Mph." STFU, nobody cares. Im going to use these lights at whatever speed and whenever I want. Its my truck, so I can do whatever the F*** I want to it. And I dont care if you think the Mopar kit is S***, because I dont care. The reason I'm getting it is because, 1.I need a fog light harness, and 2.I like how everything is built in(I have 3 holes in my dash for switches I dont use and I dont like where they are anymore.) Im getting the Mopar fogs, so live with it. And if they do cause a fire, F*** it, i got insurance.

End of disscussion, Im tired of fighting over what fog lights can and can't be used for.

 

lol, Insurance wont give you **** for these trucks btw.

 

Duh, I was referring to your extensive knowledge of FOG.....get it? London FOG??? eh? And what, you don't think they have roads in England? Ha!

 

hey purple, keep me posted on how your install works because I've always wanted to add fogs to my truck, stock or otherwise but I have no idea how to go about it, unlike SOME people .....

 

Good luck driving a Ram Pickup around London.

 

I asked my dealer about me installing them myself. They said that the accessorykit comes with instructions.

When I get them, I will do a DIY for them.

 

Not that hard, just drive on the other side of the road. Oh, and roundabouts instead of lights. So, what's your point?

 

I went ahead and built my own harness. Its pretty stout, 12 guage wiring, waterproof fuses and relay, and tape, LOTS of Tape!! If you guys want, I can post a DIY when I do this to my S10.

Now, does anybody know how to intergrate the harness into the factory switch?

BTW, I did start a fire! I put the power wire on the wrong **** of the switch and the ground wire caught on fire and burned up. Purpls fine, though.