1997 3500 will not start
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I have a 3500 360 auto 4x4. It had stalled out on me and would not start. Fuel pump was not running so I replaced. Fuel pump was not the problem. Now starting but stalling when put in gear. Changed crank sensor but still stalled. Cam sensor has been changed when i did the distributor also coil changed. now doesn't start at all. Comp scanner cannot connect to ecm. what to do now? Any help would be appreciated. Also for the past 4 or so years it has bucked and farted on intermitant basis. no one could seem to find the problem since it never did it when brought to dealership.
#5
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I believe I found the problem. A wire going to the tranfer case was hanging on the front drive shaft and wore down to bare wire. Taped it up, zipped tied it a way from anything now truck starts and drives. Hopefully it is not just coincidence. Have not taken it for a raod trip yet just around my garage. I think it was grounding out causing the problem. here is to hoping. Thanks for the help.
#7
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I've seen 2 ASD relays fail on Dodge 2500s in the past couple of months. They click like they're working but voltage output is low. ( Runs fuel pump, computer power and coil.) Try a Napa one to see if it fixes it but get a mopar one to keep it running. Napa one in the glove box for emergency. Good luck. Hope this helps
Trending Topics
#8
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I've seen 2 ASD relays fail on Dodge 2500s in the past couple of months. They click like they're working but voltage output is low. ( Runs fuel pump, computer power and coil.) Try a Napa one to see if it fixes it but get a mopar one to keep it running. Napa one in the glove box for emergency. Good luck. Hope this helps
![Confused](https://dodgeforum.com/forum/images/smilies/confused.gif)
#10
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Thank you very much!