When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I was just thinking about this today. 2000-2001 Spindles and Brake calipers. The newer calipers are 2 piston compared to the 94-99's 1 piston.
Trailer Hitch.
There is a Ram at my junkyard that has tan power leather seats. I would get them if they were black.
All Ram wheels
Off Road springs
Sport Package
Emblems
Last edited by PurplDodge; 02-05-2009 at 05:44 PM.
another little item to add is the clip for the sun visors, ive broken those little buggers before [so pick up a spare or 3]
i grabbed two of em, a sun visor, and 3 toggle switches for 10 bucks at a local Pick n Pull
Gas tank skid plate (found on off road rams). It may be plastic but scraping it is better than hitting your tank. You'll need the brackets too.
I'd love to have one...
Well since I work at a salvage yard, I get to pick all I want off every Ram that comes in and have access to other yards at a discounted rate, yea I'm braggin lol I have spare plasticinterior parts for both of my 96's
another idea is to look at other trucks for cool stuffs you could use on yer RAM
not on my ram but on the XJ i built a bastard pack lift for 48 bucks from F150 coils, and doakota leafs
another idea is to look at other trucks for cool stuffs you could use on yer RAM
not on my ram but on the XJ i built a bastard pack lift for 48 bucks from F150 coils, and doakota leafs
Ya, I did that on my old ranger.. I elongated my rear shackles, f150 coils (stiff as crap but taller) and put on some long shocks i found, that I dunno where they came from.. 4x4 blocks off a lifted ranger i found.. adjustable alignment cams from A-line.. I prolly spent 200 bucks on the whole thing, was as good as a lot of my friend's lift kits..
money isn't everything..
someone should put together a "Red neck" lift kit for the ram.. parts from everywhere. 2500 coils, whatever blocks in the rear.. Pitman arm off a 1940 Pontiac torpedo eight coupe, whatever... lol