Oil mod?
Record Breaker
Joined: Jun 2008
Posts: 1,669
Likes: 4
From: The Buckeye State... OHIO
and that's only a 408 strocker!! If you got a 360.. you can bore it out to a 426!!
link:
http://www.krcperformance.com/krc/in...d=40&Itemid=26
link:
http://www.krcperformance.com/krc/in...d=40&Itemid=26
Record Breaker
Joined: Nov 2005
Posts: 1,827
Likes: 3
From: Ontario Canada
Stock 4x4 QC 5.9s Ive seen running mid 17s, if you got your running 14s thats pretty good congrats! When I started racing my Indy back in July 96, trucks were few n far between. Lot more trucks racing now.
Dak was nice, Mr Durango needs to learn how to drive lol. 500hp is about 375rwhp on a dynojet btw.
Id pass on the 426, less chance it will last as long as a 408 or make as much hp.
The 426 you have to notch the bottom of the cylinders a fair bit compared to the 408 which reduces the blocks strength. They have much sharper rod angle, have to use shorter skirted pistons, that come too far out of the hole. Intake manifold and heads especially are way too small to utilize the ci's.
Dak was nice, Mr Durango needs to learn how to drive lol. 500hp is about 375rwhp on a dynojet btw.
Id pass on the 426, less chance it will last as long as a 408 or make as much hp.
The 426 you have to notch the bottom of the cylinders a fair bit compared to the 408 which reduces the blocks strength. They have much sharper rod angle, have to use shorter skirted pistons, that come too far out of the hole. Intake manifold and heads especially are way too small to utilize the ci's.
Professional
Joined: Nov 2008
Posts: 247
Likes: 0
From: Adams Center, NY/ Bagram, Afghani Land
I think this is my favorite vid, as far as racing a 3/4 4x4 Ram. I know its a cummins but still one helluva nice truck.
http://www.youtube.com/watch?v=5B-nU2qj580
http://www.youtube.com/watch?v=5B-nU2qj580
Thread Starter
|
Record Breaker
Joined: Oct 2007
Posts: 1,680
Likes: 0
From: Allentown, PA
Stock 4x4 QC 5.9s Ive seen running mid 17s, if you got your running 14s thats pretty good congrats! When I started racing my Indy back in July 96, trucks were few n far between. Lot more trucks racing now.
Dak was nice, Mr Durango needs to learn how to drive lol. 500hp is about 375rwhp on a dynojet btw.
Id pass on the 426, less chance it will last as long as a 408 or make as much hp.
The 426 you have to notch the bottom of the cylinders a fair bit compared to the 408 which reduces the blocks strength. They have much sharper rod angle, have to use shorter skirted pistons, that come too far out of the hole. Intake manifold and heads especially are way too small to utilize the ci's.
Dak was nice, Mr Durango needs to learn how to drive lol. 500hp is about 375rwhp on a dynojet btw.
Id pass on the 426, less chance it will last as long as a 408 or make as much hp.
The 426 you have to notch the bottom of the cylinders a fair bit compared to the 408 which reduces the blocks strength. They have much sharper rod angle, have to use shorter skirted pistons, that come too far out of the hole. Intake manifold and heads especially are way too small to utilize the ci's.
yeah thats true, I would imagine it would be smarter to drop some extra weight and throw in a larger block(390?) then stroke that out to a 426. Or just grab a big block and be done with it.
