2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

badd tranny

Old Feb 16, 2009 | 03:04 PM
  #1  
calumetbud's Avatar
calumetbud
Thread Starter
|
Rookie
Joined: Feb 2009
Posts: 65
Likes: 0
Unhappy badd tranny

I have a 42re? tranny that is not shifting right, i changed the fluids and filter(which was badly burnt and smelled badd) put +4 fluid back in it. It seemed to help it. But when I kinda get on the gas a little it wont shift until I let off the gas. Then it will slip into gear. My o/d light does not work in the dash at all. I have checked the fuses. I checked the switch itself but could not get any fire . I have a 1998 Ram with about 115,000 miles on it,tranny was rebuilt about year and a half ago. Thats why i changed the fluid so I would know for sure what fluid was in it. Thanks for any comments or suggestions...Bud
 
Reply
Old Feb 16, 2009 | 05:41 PM
  #2  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

You probably should have tried adjusting the bands too, while you had the pan off. You can still adjust the front band without removing the pan again.
 
Reply
Old Feb 16, 2009 | 06:08 PM
  #3  
calumetbud's Avatar
calumetbud
Thread Starter
|
Rookie
Joined: Feb 2009
Posts: 65
Likes: 0
Default

yes I agree,wished I had read the forums before I took the pan off...I went to autozone and had them read the codes for me and it come up with
1)transmission 12 v supply relay fault
2)3-4 solenoid fault-no rpm change at lock up
3)the pcm has detected a malfunction in the 3rd and 4th gear shift
4th)torque converter clutch solenoid condition
will any of these faults cause my o/d light not to come on
 
Reply
Old Feb 17, 2009 | 08:37 AM
  #4  
calumetbud's Avatar
calumetbud
Thread Starter
|
Rookie
Joined: Feb 2009
Posts: 65
Likes: 0
Default

anyone know why my overdrive wont work,the light doesnt even come on in the dash.
 
Reply
Old Feb 17, 2009 | 06:09 PM
  #5  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

You have 4 fault codes , any 1 or all of them can cause that.
 
Reply
Old Feb 17, 2009 | 09:33 PM
  #6  
dblj16380's Avatar
dblj16380
Veteran
Joined: Nov 2008
Posts: 469
Likes: 0
From: Oxford, MI
Default

Originally Posted by calumetbud
anyone know why my overdrive wont work,the light doesnt even come on in the dash.
If i'm not mistaken, your truck WILL NOT shift into O/D without first being in drive. If you are having issues with your truck shifting into 3rd(D) then it surely won't shift into 4th(O/D). That is the code your truck is throwing and it is right in line with your symptoms.

If you look back through a couple of threads, MonteC usually jumps in at some point and suggests replacing a couple of things. You should check those and probably start there. It might just be a sensor or solenoid in your trans that is giving you the issue.

Edit: Plus I am almost positive that your T/C won't lock up unless you are at like 55mph and in D or O/D.
 
Reply
Old Feb 18, 2009 | 11:01 AM
  #7  
calumetbud's Avatar
calumetbud
Thread Starter
|
Rookie
Joined: Feb 2009
Posts: 65
Likes: 0
Default

I dont even have the light in the cluster coming on saying wheter its on or not.
 
Reply
Old Feb 18, 2009 | 11:47 AM
  #8  
Mowhawk's Avatar
Mowhawk
Record Breaker
Joined: Oct 2007
Posts: 1,680
Likes: 0
From: Allentown, PA
Default

Tv cable fubared?
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:16 PM.