Well the mopar one was on back order from summit.

But I found this mallory one on jegs and it's brass. Anyone ever use it?
http://www.jegs.com/i/Mallory/650/29509/10002/-1

 

I used the ones from the dodge dealer...

wires & coil are replaced when they are bad or you want an upgrade, cap, rotor & plugs depends on your mods, stock you could probably go 45k or more depending on the plug. I always did mine around 25~30k.

edit: and that is where I found the accell cap & rotor did not last as long as the mopar ones.

 

Guess I could go hit the dealer up.

 

$hit mine needs to be done I have almost 47k on the factory stuff.

 

this cap and rotor is brass summit dist cap and rotor

is this the mopar cap and rotor on back order? i ask b/c the terminals are aluminum

 

I just ended up ordering the mopar performance cap and rotor off the mopar performance web site.

8.5mm MSD wires and Champion Iridium plugs
off of summit.

Thanks for all the input guys.

 

Is there a mopar perf cap and a regular mopar cap?

 

Thats a good question. I don't really know. I imagine there's a stock replacement...

 

get some new stuff in there

 

Yea summit is going to love me new taylor 8mm wires mopar cap not sure about the plugs? I want platinum plugs.