There are a few methods.
Look here: https://dodgeforum.com/forum/2nd-gen...e-ram-faq.html

 

Alright thanks guys for all the help I'll check google and varify if I have the deathflash, which I'm sure I do but if you have anyother suggestions for me please put them up, and I'll come back if I have more questions which I most likely will thanks again for all the help

 

so my plenum gasket is torn, is all i have to do is take off the intake manifold and replace that gasket, or what do i do?

 

Yep, pretty much. But replace it whith a Hughes or APS kit instead of the stock junk... or you will be doing it again in no time.

 

alright i will do that i definably dont wanna do it twice looks like there is alot of things to do to even get to it

 

Sorry forgot, is there a site I can go to order it or would an auto shop have it

 

i have been looking on google for the Hughes and APS kits but all i find is links talking about getting the kits does anyone have a site that has them?

 

http://www.hughesengines.com/Index/p...z&partid=22220

 

Yep, that Hughes kit that Laramie posted is the kit I purchased. Works very well.

Another option is:
http://www.apsprecision.com/billetplenum.html

 

I recommend an M1 manifold. No more plenum gasket to leak while giving a noticeable power boost.
Also check your IAT, mine was covered in oil because of the plenum leak, I don't know if oil is bad for it but I replaced it anyways.
But at the minimum I would suggest the aluminum belly pan.