3/4 ton springs on a 1/2 ton?
Record Breaker
Joined: Mar 2009
Posts: 2,181
Likes: 3
From: Battle Ground WA
An air shock will not support the same weight as an air bag not to mention air shocks put a lot stress onto the shock mounts that weren't designed bare any weight.
well i have a 99 dodge ram 1500 5.2 v8 magnum and i took the front end and rear end off a 00 dodge ram 2500 it bolted right on so i would look for a broken 2500 and do the swap its alot of work but worth it in the end just my 2cents good luck
Registered User
Joined: Sep 2009
Posts: 3
Likes: 0
Pugsley
The 2007 dodge mega cab does have the 3/4 ton chassis 3" wide springs so you can put 3/4 ton springs on your truck but why? Alot of talk about air bag / timbrin blocks air shocks. All of these are band aids the timbrens and air bags go were the bump stop is. Last place the vehicle is suppose to touch. when you install these products it becomes the first place not a great idea there is a much better product on the market check it out not cheap you get what you pay for (Maxloader)
Registered User
Joined: Nov 2011
Posts: 2
Likes: 0
why put a 3/4 ton 4x4 suspension on a 1/2 ton truck....
some one offered up their suspension off a 3/4 ton 4x4 for $500
I would like to step up into my truck....
I dont want the truck to be the same height as the curb...
I just want it to look like a
but don't want to pay for it
some one offered up their suspension off a 3/4 ton 4x4 for $500
I would like to step up into my truck....
I dont want the truck to be the same height as the curb...
I just want it to look like a
but don't want to pay for it
