light bar/ bumper lights
Thread Starter
|
Champion
Joined: Jul 2008
Posts: 3,430
Likes: 2
From: NW Arkansas
light bar/ bumper lights
anyone have pics of a lightbar similar to this on their ram or any other ideas for lights up front......not looking for a bullbar or grill guard
http://images.marketplaceadvisor.cha...reetbar-04.jpg
http://images.marketplaceadvisor.cha...reetbar-04.jpg
Rookie
Joined: Dec 2008
Posts: 58
Likes: 0
From: lake Country BC Canada
I apologize, couple people asked about my light bar. it didn't cost me anything except for the lights which where on sale at an equipment/surplus store. The metal was just scrounged from my Dads shop.
It consist or a piece of long angle iron and 2 short pieces, 2 different diameters or square tube.
Pic Below- Its just bolted onto the bumper support bracket, obviously won't fit if you have that factory fog light plastic thing in your bumper.
The bolt going through the blue part in the pic below can be removed and then the blue part slides off and the lights unplug to make it easy to remove the assembly.
Thank You
And chicks dig a man who can turn night into day
It consist or a piece of long angle iron and 2 short pieces, 2 different diameters or square tube.
Pic Below- Its just bolted onto the bumper support bracket, obviously won't fit if you have that factory fog light plastic thing in your bumper.
The bolt going through the blue part in the pic below can be removed and then the blue part slides off and the lights unplug to make it easy to remove the assembly.
Thank You
And chicks dig a man who can turn night into day
Captain
Joined: Apr 2008
Posts: 732
Likes: 0
From: Grand Forks, ND
that light bar is not made for 2nd gens. ive seen them on newer trucks but i have tried and cant order them. our trucks are getting old and people are moving on.
I like the build. i might need to do this. im making myself a tube bender this weekend then i might do this. be simple basically the same as yours but i could use tube and make it a little more stylish
I like the build. i might need to do this. im making myself a tube bender this weekend then i might do this. be simple basically the same as yours but i could use tube and make it a little more stylish
Record Breaker
Joined: Aug 2008
Posts: 1,354
Likes: 1
From: stationed in nc
yea, i would like to build something just like that to hold two or four lights, guess i could build something cool< but i think i am just going to mount everything behind the bumper, and be done, i can make some brackets back there, and just shine them throuhg the two open holes in the bumper...
Captain
Joined: Jul 2008
Posts: 535
Likes: 0
From: Alabama
Trending Topics
Veteran
Joined: Sep 2009
Posts: 436
Likes: 0
From: London Ontario
Theres these things as well, not to sure if they would look good or not though.
http://www.autoworldaccessories.com/...tegory_id=1282
http://www.autoworldaccessories.com/...tegory_id=1282
