fastman owners
#22
#23
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
i put it on and made about a 1 mile run to get the transmission fluid hot enough to get an accurate reading and the idle wouldn't drop below 1k.
i unhooked the battery, held the key down for about 20 seconds then turned on the lights for about a half hour or so.
then a little while later i made about a 30 mile run and it was the same thing, won't drop below 1k rpm.
the tv cable seems to be adjusted right.
the gas pedals cable on the throttle body has about 1/8" of play before it starts to move the pedal.
the cruise cable is the same as before also.
i'm thinking that the IAC isn't plugging that hole enough, what do y'all think?
i unhooked the battery, held the key down for about 20 seconds then turned on the lights for about a half hour or so.
then a little while later i made about a 30 mile run and it was the same thing, won't drop below 1k rpm.
the tv cable seems to be adjusted right.
the gas pedals cable on the throttle body has about 1/8" of play before it starts to move the pedal.
the cruise cable is the same as before also.
i'm thinking that the IAC isn't plugging that hole enough, what do y'all think?