just did my plenum!
#21
02-09-2010 | 07:04 PM
Professional
Joined: Nov 2009
Posts: 112
Likes: 0
From: Central Florida
I just measured a plate on an old plenum I have and a piece 16" by 7" will do
#23
02-10-2010 | 07:50 AM
Registered User
Joined: Feb 2010
Posts: 5
Likes: 0
From: New Haven, IN
Nothing, just let it sit overnight before you tear into it. A cheap plastic tool from Autozone or wherever will disconnect it at the fuel rail along with a rag to soak up any spillage. wear eye protection anyway.
And disconnect the negative battery cable first , before you do anything else.
And disconnect the negative battery cable first , before you do anything else.
#24
02-10-2010 | 08:28 AM
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 8
From: Gainesville, Ga.
fuel line disconnect is on the fuel rail, drivers side. size=3/8
expensive tool (not required)
http://www.sjdiscounttools.com/ap7836.html
cheap tool (fine)
http://www.sjdiscounttools.com/kdt3530.html
expensive tool (not required)
http://www.sjdiscounttools.com/ap7836.html
cheap tool (fine)
http://www.sjdiscounttools.com/kdt3530.html
#25
02-10-2010 | 07:20 PM
Registered User
Joined: Feb 2010
Posts: 5
Likes: 0
From: New Haven, IN
fuel line disconnect is on the fuel rail, drivers side. size=3/8
expensive tool (not required)
http://www.sjdiscounttools.com/ap7836.html
cheap tool (fine)
http://www.sjdiscounttools.com/kdt3530.html
expensive tool (not required)
http://www.sjdiscounttools.com/ap7836.html
cheap tool (fine)
http://www.sjdiscounttools.com/kdt3530.html
#26
02-10-2010 | 08:01 PM
Damnit I cant wait to change my plenum here in about a month! I'm gonna use the APS kit. I'm thinking about not doing the kegger mod. But while I'm in there I'm gonna change the oil, distributor cap and rotor, timing chain, serpentine belt, all the hoses, spark plugs (NGK), and the front oxygen sensor (NTK).
Plus after I do that I will be getting the Harland Sharp 1.7 Roller Rockers from John Mercedes. PurplDodge will be running like a beast!!!!
Plus after I do that I will be getting the Harland Sharp 1.7 Roller Rockers from John Mercedes. PurplDodge will be running like a beast!!!!
#27
02-10-2010 | 08:29 PM
Damnit I cant wait to change my plenum here in about a month! I'm gonna use the APS kit. I'm thinking about not doing the kegger mod. But while I'm in there I'm gonna change the oil, distributor cap and rotor, timing chain, serpentine belt, all the hoses, spark plugs (NGK), and the front oxygen sensor (NTK).
Plus after I do that I will be getting the Harland Sharp 1.7 Roller Rockers from John Mercedes. PurplDodge will be running like a beast!!!!
Plus after I do that I will be getting the Harland Sharp 1.7 Roller Rockers from John Mercedes. PurplDodge will be running like a beast!!!!
#30
02-10-2010 | 09:21 PM
I'm hoping I wont recongnize the truck after I put on the APS Plenum and all the stuff I listed above. Purpl is starting to show her age after 179,000 miles. I just want to have her running in tip-top shape before we start towing the camper in the spring.