Lockout.

 

the truck seemed to run fine today. forgot to go to advanced auto to get the codes. the weather really sucks today. luckily my 4wd works....

 

Hey so I had my tranny rebuilt about a month or so ago..and 3 days ago my cel light came on... I got the code p1740 ...wich I read has something to do with the tcc or o/dc ??? Could this happen after I had my tranny rebuilt? I mean the truck seems to run ok..there is a clunk noise when I let off the gas goin about 10 mph sometimes. But other than that..idk...

 

Check these links http://www.justanswer.com/questions/...ram-p1740-code
http://wiki.answers.com/Q/What_is_co...1500_5.9_liter
Dave

 

yea i actually came across those when i was lookin up some info. but i called the guy who rebuilt my tranny and he said "if it is running ok, it is probably a glitch in the computer" but if i am coasting through a parking lot and pusht eh accelerator, for a split second it will hesitate then engage..its werid..its only 1st gear though

 

Too many people have these trannies rebuilt when a rebuild is'nt needed. Alot of the times the problem with these trannies is nothing more than a $35 TCC/OD solenoid. Not saying that's your problem but I bet it's very likely.

 

yea, well the tranny DID need rebuilt in my case.... would no shift into o/d had 2 diff tranny shops look at it...

about the tcc...how would i know if that is it? and is it easily replacable?

 

ive been noticing lately that my rpms are about 200 or so higher than they usually are. going about 55mph they are at 1800. at 65 they are at like 2200... how hard is the tcc to replace? or should i have a shop do it..the dude that did my tranny