One big ram (wish it was mine)
Champion
Joined: Apr 2007
Posts: 2,831
Likes: 1
From: Miami, Fl
If the truck started out on a 3500 frame and had 2 1/2 ton rockwells under and a cummings motor it might be worth it, it would also be able to go off the road and not fall flat on its ***.
Look at the dinky axles still sitting underit, ok for 35's but not for the chunks of rubber on it.
Another idiot with no knowledge and to much money. Now he figured out that he is an idiot and wants to get rid of it
Look at the dinky axles still sitting underit, ok for 35's but not for the chunks of rubber on it.
Another idiot with no knowledge and to much money. Now he figured out that he is an idiot and wants to get rid of it
Grand Champion
Joined: Aug 2009
Posts: 5,971
Likes: 45
From: MAINE
thats exacally what i looked for first. it says nothing about gears, its probably a hog
Some dumbass bid $15,000 on this piece of ****.
Professional
Joined: Apr 2009
Posts: 132
Likes: 0
From: Essex, England
It also doesn't say whether it's 4x4 or 2WD, although at first glance it looks like it is 4x4 due to the differential on the front axle, unfortunately there appears to be no prop shaft!!!
It also leans toward the driver side, not bad considering it seems to be sitting on level ground, lol!
It also leans toward the driver side, not bad considering it seems to be sitting on level ground, lol!
Yep, no front driveshaft and you'd think that since he made the lift custom, he could have designed it without the Dodge lean in it.
His response:
"Unfortunately, I am sorry but they are no longer available. What is listed and in veiw in the pictures is hoe the truck comes."
My next question:
"Ok, I have a couple of other questions. What motor is in the truck? Is the front driveshaft still connected so you have 4WD? What axles are under the truck. And what gears do the axles have?"
I am awaiting his response!
"Unfortunately, I am sorry but they are no longer available. What is listed and in veiw in the pictures is hoe the truck comes."
My next question:
"Ok, I have a couple of other questions. What motor is in the truck? Is the front driveshaft still connected so you have 4WD? What axles are under the truck. And what gears do the axles have?"
I am awaiting his response!
"Unfortunately, I am sorry but they are no longer available. What is listed and in veiw in the pictures is hoe the truck comes."
My next question:
"Ok, I have a couple of other questions. What motor is in the truck? Is the front driveshaft still connected so you have 4WD? What axles are under the truck. And what gears do the axles have?"
I am awaiting his response!
My next question:
"Ok, I have a couple of other questions. What motor is in the truck? Is the front driveshaft still connected so you have 4WD? What axles are under the truck. And what gears do the axles have?"
I am awaiting his response!
His response:
"I't has a 4.7 l V8. I don't know about the axel or gears I apologize. No the front drive axel is not connected it would require a custo fabricated shaft as we used it for a show truck we didn't need the 4x4. It does work just needs the part."
To the bidder of Dodge Ram V.I.N 3B7HF13Y5EG194859, ebay number 250575663766, do not buy this truck. It is obviously a POS and the owner/seller is a complete idiot (Wait, the driveshaft is missing; in-complete idiot).
Last edited by PurplDodge; Feb 11, 2010 at 07:19 PM.