Noise from the Transfer Case...
#1
Noise from the Transfer Case...
I just recently engaged my 4 wheel and immediatly there was a loud squeel coming from the transfer case. I looked into having a shop rebuild it, but they said it would run about $1500. Too rich for my blood and I have a camping trip coming up, I NEED MY 4 WHEEL! Is this something that I could do at home? Would it be worth it to rebuild it or purchase a used one. I would hate to buy one and have IT fail too. Any and all info will be appreciated. Cheers to the Irish!
#2
usually these transfer cases are bullitproof....if you get one from a junkyard ( http://car-part.com ) it should be able to hold up for a while....a used one with a warentee...
#3
The only ones I could find in my area are different gears from what I have. ...If only I won the lottery.... But the guy I spole with at the shop said something about a "fork anchor" ???
That website has always been a lifesaver. Couldn't tell you how much I've used it, but I just hate thinking that I'm buying something somebody has already beat the living ****e out of.
That website has always been a lifesaver. Couldn't tell you how much I've used it, but I just hate thinking that I'm buying something somebody has already beat the living ****e out of.
Last edited by mnewbolds; 03-17-2010 at 08:57 AM.
#5
#7
im asking the same thing.. and these transfers are not bullitproof... they are a weak link... but not so much on stock parts... i dont know what your problems could be, other then the same thing the shop said...
but get you a new one, and rebuilt the one you have, its not that hard, you can do it... as long as your mech inclinded...
but get you a new one, and rebuilt the one you have, its not that hard, you can do it... as long as your mech inclinded...
Trending Topics
#9
I know it's not the joint in the d-shaft. It'll squeel when not moving. Just today I engaged it to see if a neighbor could see something I hadn't. OF COURSE it doesn't make a sound. WTF...
But as for meanwhite, Yeah, it's all stock. Just the 5.2. No lockers....yet.
Anyone know a good source for a t-case? I found them at RockAuto and few others but I would like to use something a little more reputable. Thanks
But as for meanwhite, Yeah, it's all stock. Just the 5.2. No lockers....yet.
Anyone know a good source for a t-case? I found them at RockAuto and few others but I would like to use something a little more reputable. Thanks
Last edited by mnewbolds; 03-20-2010 at 09:26 PM.
#10
$600 here rebuilt.
scroll down in the little center window to dodge.
http://www.transfercases.com/order.htm
scroll down in the little center window to dodge.
http://www.transfercases.com/order.htm